Monitor for APC UPS (USB)

Version: 
0.17
Release date: 
Wednesday, 9 September, 2015

License:

Interface:

Authors/Port authors:

The program is designed to track the state of the uninterruptible power supply series APC Back-UPS CS, Back-UPS ES, and Back-UPS RS, connected through the UPS attached to the USB-cable.

This software is distributed as compressed package. You have to download and manually install it; if prerequisites are required, you will have to manually install them too.

Manual installation

Available both as ZIP and WarpIN package:

  • download the ZIP package to temporary directory and unpack it to destination folder;
  • the WarpIN package is self-installing.

See below for download link(s).

Following ones are the download links for manual installation:

Monitor for APC UPS (USB) v. 0.17 (9/9/2015, Larin Yury) Readme/What's new
Monitor for APC Back-UPS (USB) v 0.17 31.08.2015 (c) Larin Yury (aka Improver) Mail to: improver@rambler.ru Web: http://apcusbm.narod.ru The program is intended for tracking a condition of a uninterruptable power supply (UPS) of APC series Back-UPS CS/ES/RS and Smart-UPS, connected by means of applied to UPS USB-cable (part number 940-0127B or similar), and also for turn off of the computer in case of power supplies disconnecting. The program extends "as is" and for all troubles which the given program on your computer I of personally any responsibility can make I do not carry, etc. === System requirements === - operating system OS/2 Warp 3.0 and above, eComStation - installed driver for USB - installed USBCALLS.DLL and driver USBRESMG.SYS: from Lars Erdmann 10.199 (2015/07/23) or later, http://hobbes.nmsu.edu/h-search.php?sh=1&button=Search&key=usbdrv or from W.M.Brul 14.198 (2015/06/30) or later, http://hobbes.nmsu.edu/h-search.php?sh=1&button=Search&key=usbres0 Optional: - for the control of OS/2, the 'Power' object requires an ACPI/APM driver - for switching-off of a feed of the system block power unit ATX and established (efficient) in OS/2 a control system of power supplies is necessary.:-) =======
 hobbes.nmsu.edu/download/pub/os2/util/power/mAPCUPS017.zip
Monitor for APC UPS (USB) v. 0.16.1 (9/9/2015, Larin Yury) Readme/What's new
Monitor for APC Back-UPS (USB) v 0.16.1 1.04.2015 (c) Larin Yury (aka Improver) Mail to: improver@rambler.ru Web: http://apcusbm.narod.ru The program is intended for tracking a condition of a uninterruptable power supply (UPS) of APC series Back-UPS CS/ES/RS and Smart-UPS, connected by means of applied to UPS USB-cable (part number 940-0127B or similar), and also for turn off of the computer in case of power supplies disconnecting. The program extends "as is" and for all troubles which the given program on your computer I of personally any responsibility can make I do not carry, etc. === System requirements === - operating system OS/2 Warp 3.0 and above, eComStation - installed driver for USB - installed 'USB Expanded Control Driver for OS/2' (USBECD) (see http://hobbes.nmsu.edu/h-search.php?sh=1&button=Search&key=usbecd2) Optional: - for the control of OS/2, the 'Power' object requires an ACPI/APM driver - for switching-off of a feed of the system block power unit ATX and established (efficient) in OS/2 a control system of power supplies is necessary.:-) =======
 hobbes.nmsu.edu/download/pub/os2/util/power/mAPCUPS0161.zip
Record updated last time on: 30/10/2020 - 05:57

Translate to...

Add new comment