GenMAC Driver

Version: 
2.20
Release date: 
Monday, 11 February, 2008

Categories:

License:

Interface:

Authors/Port authors:

GenMAC is a personal attempt of Willibald Meyer to design a device driver that offers support for a lot of recent and modern network interface cards (NICs), with a strong accent for gigabit and on-board network cards.

This software is distributed as compressed package. You have to download and manually install it; if prerequisites are required, you will have to manually install them too.

Manual installation

Available both as ZIP and WarpIN package:

  • download the ZIP package to temporary directory and unpack it to destination folder;
  • the WarpIN package is self-installing.

See below for download link(s).

Online documentation:

Following ones are the download links for manual installation:

GenMac Full Installation v. 2.20 (11/2/2008) Readme/What's new
This is the full installation package of GenMac, containing all supported drivers. For Installation the WarpIN Installer is required. As an alternative, you can download the split installation package from the top of this page, being considerably smaller. However, you need the base driver package and the vendor specific packages, matching your network interface cards.
 www.netlabs.org/pub/genmac/genmac220.wpi
GenMac Split Installation - Additional Driver Pack 3com v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: 3Com/SKNet Gigabit [[10B7:1700]] 3Com 3C90xC PCI [[10B7:9200]] 3Com 3C90xC PCI [[10B7:9201]] 3Com/SKNet Gigabit [[1148:4320]]
 www.netlabs.org/pub/genmac/genmac220_3com.wpi
GenMac Split Installation - Additional Driver Pack Atheros v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Atheros Wlan [[168C:0012]] Atheros Wlan [[168C:0013]] Atheros Wlan AR5005g [[168C:001A]] Atheros Wlan CARDBUS [[168C:001B]] Atheros Wlan [[168C:1014]]
 www.netlabs.org/pub/genmac/genmac220_atheros.wpi
GenMac Split Installation - Additional Driver Pack Broadcom v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Broadcom Gigabit [[14E4:1654]] Broadcom Gigabit [[14E4:165D]] Broadcom Gigabit [[14E4:1677]] Broadcom Gigabit [[14E4:167D]] Broadcom 10/100 [[14E4:170C]] Broadcom 10/100 [[14E4:4100]] Broadcom B/G [[14E4:4318]] Broadcom B/G [[14E4:4320]] Broadcom A/B/G [[14E4:4324]] Broadcom 10/100 [[14E4:4401]]
 www.netlabs.org/pub/genmac/genmac220_broadcom.wpi
GenMac Split Installation - Additional Driver Pack Dlink v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Dlink DWL-520+ [[104C:8400]] Dlink DWL-G520+ [[104C:9066]]
 www.netlabs.org/pub/genmac/genmac220_dlink.wpi
GenMac Split Installation - Additional Driver Pack Intel v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Intel 10/100/1000 [[8086:101E]] Intel 2100 Wlan [[8086:1043]] Intel 10/100/1000MM [[8086:1049]] Intel 10/100/1000MM [[8086:104B]] Intel 10/100/1000 [[8086:1076]] Intel 10/100/1000PL [[8086:109A]] Intel 10/100/1000PL [[8086:10B9]] Intel 10/100 [[8086:1229]] Intel 2200 Wlan [[8086:4220]] Intel 3945 a/b/g [[8086:4222]] Intel 2915 a/b/g [[8086:4223]] Intel 2915 a/b/g [[8086:4224]] Intel 3945 a/b/g [[8086:4227]] Intel 4965 a/g/n [[8086:4229]] Intel 4965 a/g/n [[8086:4230]]
 www.netlabs.org/pub/genmac/genmac220_intel.wpi
GenMac Split Installation - Additional Driver Pack Marvell v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Marvell 802.11 b/g [11AB:1FA6] Marvell 802.11 b/g [11AB:1FA7] Marvell Yukon 88E8001 [11AB:4320] Marvell Yukon 88E8052 [11AB:4360] Marvell Yukon 88E8050 [11AB:4361] Marvell Yukon 88E8053 [11AB:4362] Marvell Yukon 88E8055 [11AB:4363] Marvell Yukon 88E8056 [11AB:4364]
 www.netlabs.org/pub/genmac/genmac220_marvell.wpi
GenMac Split Installation - Additional Driver Pack NVidia v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: nForce 4 10/100/1000 [[10DE:0057]] nForce 2 10/100 [[10DE:0066]] nForce 3 10/100 [[10DE:00D6]] nForce 5 10/100/1000 [[10DE:0373]]
 www.netlabs.org/pub/genmac/genmac220_nvidia.wpi
GenMac Split Installation - Additional Driver Pack Other v. 2.20 (11/2/2008) Readme/What's new
This is an additional driver pack for all other vendors for the split installation. For installation the base driver package is required. Provides support for: Com/SKNet Gigabit [1148:4320] CISCO mPCI [14B9:A504] Attansic Gigabit [1969:1048]
 www.netlabs.org/pub/genmac/genmac220_other.wpi
GenMac Split Installation - Additional Driver Pack Ralink v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for ralink NICS.
 www.netlabs.org/pub/genmac/genmac220_ralink.wpi
GenMac Split Installation - Additional Driver Pack Realtek v. 2.20 (11/2/2008) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Rtl 8167 GigaBit [[10EC:8167]] Rtl 8168 GigaBit [[10EC:8168]] Rtl 8169 GigaBit [[10EC:8169]] Rtl 8180 Wlan [[10EC:8180]]
 www.netlabs.org/pub/genmac/genmac220_realtek.wpi
GenMac Split Installation - Base Driver Package v. 2.20 (11/2/2008) Readme/What's new
This is the base driver package of the split installation package of GenMac. For each of your GenMac supported hardware a corresponding additional driver package is required as well. For Installation the WarpIN Installer is required. As an alternative, you can download the full installation package from the bottom of this page, requiring no extra packages. However, this package is considerably larger, as it contains drivers for all suppored network interface cards.
 www.netlabs.org/pub/genmac/genmac220_base.wpi
GenMac Full Installation v. 2.00 (15/11/2006) Readme/What's new
This is the base driver package of the split installation package of GenMac. For each of your GenMac supported hardware a corresponding additional driver package is required as well. For Installation the WarpIN Installer is required.
 www.netlabs.org/pub/genmac/genmac200.zip
GenMac Split Installation - Additional Driver Pack Atheros v. 2.00 (15/11/2006) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Atheros Wlan [[168C:0012]] Atheros Wlan [[168C:0013]] Atheros Wlan AR5005g [[168C:001A]] Atheros Wlan CARDBUS [[168C:001B]] Atheros Wlan [[168C:1014]]
 www.netlabs.org/pub/genmac/genmac200_atheros.zip
GenMac Split Installation - Additional Driver Pack Broadcom v. 2.00 (15/11/2006) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Broadcom Gigabit [[14E4:1654]] Broadcom Gigabit [[14E4:165D]] Broadcom Gigabit [[14E4:1677]] Broadcom Gigabit [[14E4:167D]] Broadcom 10/100 [[14E4:170C]] Broadcom 10/100 [[14E4:4100]] Broadcom B/G [[14E4:4318]] Broadcom B/G [[14E4:4320]] Broadcom A/B/G [[14E4:4324]] Broadcom 10/100 [[14E4:4401]]
 www.netlabs.org/pub/genmac/genmac200_broadcom.zip
GenMac Split Installation - Additional Driver Pack Intel v. 2.00 (15/11/2006) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: Intel 10/100/1000 [[8086:101E]] Intel 2100 Wlan [[8086:1043]] Intel 10/100/1000MM [[8086:1049]] Intel 10/100/1000MM [[8086:104B]] Intel 10/100/1000 [[8086:1076]] Intel 10/100/1000PL [[8086:109A]] Intel 10/100/1000PL [[8086:10B9]] Intel 10/100 [[8086:1229]] Intel 2200 Wlan [[8086:4220]] Intel 3945 a/b/g [[8086:4222]] Intel 2915 a/b/g [[8086:4223]] Intel 2915 a/b/g [[8086:4224]] Intel 3945 a/b/g [[8086:4227]] Intel 4965 a/g/n [[8086:4229]] Intel 4965 a/g/n [[8086:4230]]
 www.netlabs.org/pub/genmac/genmac200_intel.zip
GenMac Split Installation - Additional Driver Pack Marvell v. 2.00 (15/11/2006)
 www.netlabs.org/pub/genmac/genmac200_marvel.zip
GenMac Split Installation - Additional Driver Pack NForce v. 2.00 (15/11/2006) Readme/What's new
This is a vendor specific additional driver pack for the split installation. For installation the base driver package is required. Provides support for: nForce 4 10/100/1000 [[10DE:0057]] nForce 2 10/100 [[10DE:0066]] nForce 3 10/100 [[10DE:00D6]] nForce 5 10/100/1000 [[10DE:0373]]
 www.netlabs.org/pub/genmac/genmac200_nforce.zip
GenMac Split Installation - Additional Driver Pack Other v. 2.00 (15/11/2006) Readme/What's new
This is an additional driver pack for all other vendors for the split installation. For installation the base driver package is required. Provides support for: Com/SKNet Gigabit [1148:4320] CISCO mPCI [14B9:A504] Attansic Gigabit [1969:1048]
 www.netlabs.org/pub/genmac/genmac200_other.zip
GenMac Full Installation v. 1.00 (6/11/2005) Readme/What's new
This is the base driver package of the split installation package of GenMac. For each of your GenMac supported hardware a corresponding additional driver package is required as well. For Installation the WarpIN Installer is required.
 www.netlabs.org/pub/genmac/genmac100.zip
Record updated last time on: 16/12/2021 - 19:42

Translate to...

Add new comment