FAT32

Version: 
5.0.5
Release date: 
Monday, 11 December, 2000

License:

Interface:

FAT32.IFS for OS/2 will allow you to access FAT32 partitions (max 32 Gb, non removable) from OS/2. You cannot create or format FAT32 partitions: you'll still need Winxx to do that. Also, OS/2 CHKDSK cannot fix all possible errors that can occur, you'll have to use Windows Scandisk to fix certain errors.

To format natively removable devices, there are two options:

This software is distributed as compressed package. You have to download and manually install it; if prerequisites are required, you will have to manually install them too.

Manual installation

Available both as ZIP and WarpIN package:

  • download the ZIP package to temporary directory and unpack it to destination folder;
  • the WarpIN package is self-installing.

See below for download link(s).

For non-LVM systems ONLY: PARTFILT.FLT and OS2DASD.F32.

Since version 0.95 Extended Attributes Support (/EAS parameter in config.sys) is enabled by default.

PLEASE, NOTE: starting with version 0.97:

  • it is recommended you uninstall any earlier version of the FAT32 driver either manually or using WarpIN, if WarpIN was used to install the driver! Verify that IFS=X:\OS2\BOOT\FAT32.IFS and CALL=X:\OS2\CACHEF32.EXE lines are removed from x:\config.sys file;
  • it is recommended that you run CHKDSK : /F on every FAT32 partition that you have after installing the new version.

Online documentation:

Following ones are the download links for manual installation:

FAT32 v. 5.0.5 (7/10/2023, Arca Noae LLC) Readme/What's new
Use this driver at your own risk. This is a release of the Arca Noae FAT32 driver for OS/2 and derivative operating systems. This distribution provides a native FAT32 filesystem driver (IFS), allowing read/write access to files and directories created by other operating systems, namely, Microsoft Windows. CAPABILITIES Read, write, create, delete, check, format, label, rename. REQUIREMENTS All required libraries are included in the package. No additional supporting files are required beyond what is generally available in a base OS/2 Warp 4 distribution. The driver should install and work on OS/2 Warp 4 FixPak 13 or higher, eComStaton 1.x, 2.x, and ArcaOS 5.x. For installation, WarpIN 1.0.24 or higher is required. KNOWN ISSUES AND PROGRAM LIMITATIONS See the wiki at: https://www.arcanoae.com/wiki/fat32 for the latest information. Authors: Henk Kelder: original author Brian Smith: contributor KO Myung-Hun: main developer for the Netlabs FAT32 IFS driver Lars Edmann: developer Alfredo Fern ndez D¡az: creator of the Netlabs WarpIN Script for FAT32 and contributor David Graser: creator of the original FAT32.INF file and original WarpIN script maintainer Valery V. Sedletski: Netlabs FAT32 IFS version 0.10 developer Andy Willis: developer/contributor to and creator of the Arca Noae FAT32 fork Gregg Young: maintainer of the Arca Noae fork Steven Levine: developer/contributor to the Arca Noae fork Lewis Rosenthal: documentation for the Arca Noae fork Jan van Wijk: technical (and other) proofreading of the user's guide for the Arca Noae fork HISTORY v5.0.4 - Fixed version string buffer overflow - Fixed coding error in message retrieval code - Chkdsk now fixes bad media descriptors (these really aren't used for anything) This removed an unnecessary ominous error message; now reports a minor system error was repaired. - Added /exclude command line switch to ifs to turn off lazy write on a per disk basis - Consolidated messages into a single file f32.msg and added an associated message help file f32h.msg. - Restructured SVN for translation - Changes to wis file creation for translation and conversion to UTF-8 - Makefile changes to get the above 2 working - Cleanup issues identified by cppcheck - Fix /Q so it actually is quiet. - Fix write failure when cache isn't enabled - Add ifs messages and unicode messages to the message file. - Correct a message number and streamline finding the message file - Fix FAT32's propensity to claim it can handle FAT12/16 volumes v5.0.3 - Fixed regression that caused a file save failure in ae,exe - Cleanup and add some additional checks to the heap management code - Chkdsk now fixes mis-matched fats copies 1 over 2 - Cleanup file system type identification code - Use OS2 messages where ever possible - Move all the cache and utility messages to msg files - Fixed lazy write status message - Rework and cleanup messages throughout the code - Added code to select msg file based on language - Fixed volume name handling in format - Fix ifs and cache line placement in config,sys - Suppress spurious error messages - Multiple changes to facilitate translation - Removed code for fat 16/12 - Removed code not directly needed by fat 32 v5.0.2 - Fixed GDT/memory leaks and potential memory leaks Reworked code to make "free" easier to follow - Restored a working cache - Reworked semaphore code to serialize all fat access. - Fixed in memory directory corruption - Removed much of the logging code from release versions - Removed the Fat 12/16 code from release versions - Provide read ahead sector memory at initialization (Rich Walsh) - Initialize many uninitialized variables - Streamlined the cache initiation code lock all cache related segments in memory - Fix trap in memcpy code - Add command line option to exclude individual drives from caching - Fix chkdsk return code - Improved some messages for the utilities - Cache code tuning - Add compiler optimizations - Fixed read/write failure that occurred with disk fragmentation - Turning lazy write off in config.sys now works - Fixed several other rare traps v5.0.1 - Never released due to an SVN issue v5.0.0 - Initial release of the Arca Noae fork, based on Netlabs trunk r359. NOTICES Arca Noae FAT32 Filesystem Driver (c) 2018-2021 Arca Noae, LLC This program is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, version 2.1 of the License. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. Source code is available via Subversion or on the World Wide Web at: https://svn.arcanoae.com/fat32/ The original source code was written by Henk Kelder <henk.kelder@cgey.nl>. Henk kindly gave the copyright of the source code to netlabs.org in January 2002. OS/2 Device Driver Kit Copyright (c) 1992, 2000-2001 IBM Corporation All rights reserved. FORMAT is based on Fat32Format, (c) Tom Thornhill GPL (no strict version) http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm Valery V. Sedletski <_valerius@mail.ru> http://osfree.org
 www.arcanoae.com
FAT32 v. 0.10 r384 (ZIP format, 13/1/2021, Valery Sedletski (valerius))
 osfree.org/upload/fat32/fat32-0.10-r384-os2.zip
FAT32 v. 0.10 r384 (WarpIN installer, 13/1/2021, Valery Sedletski (valerius))
 osfree.org/upload/fat32/fat32-0.10-r384-os2.wpi
FAT32 v. 0.10 r383 (ZIP format, 12/3/2020, Valery Sedletski (valerius))
 osfree.org/upload/fat32/fat32-0.10-r383-os2.zip
FAT32 v. 0.10 r383 (WarpIN installer, 12/3/2020, Valery Sedletski (valerius))
 osfree.org/upload/fat32/fat32-0.10-r383-os2.wpi
FAT32 v. 0.10 r378 (WarpIN installer, 16/10/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r378-os2.wpi
FAT32 v. 0.10 r378 (ZIP format, 16/10/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r378-os2.zip
FAT32 v. 0.10 r364 (ZIP format, 17/9/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r364-os2.zip
FAT32 v. 0.10 r364 (WarpIN installer, 17/9/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r364-os2.wpi
FAT32 v. 0.10b R361 (ZIP format, 28/7/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r361-os2.zip
FAT32 v. 0.10b R361 (WPI installer, 28/7/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r361-os2.wpi
FAT32 v. 0.10b R359 (ZIP format, 29/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * exFAT support ("/exfat" switch is required). * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r359-os2.zip  local copy
FAT32 v. 0.10b R359 (WarpIN installer, 29/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * exFAT support ("/exfat" switch is required). * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r359-os2.wpi
FAT32 v. 0.10b R351 (ZIP format, 7/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r351-os2.zip
FAT32 v. 0.10b R351 (WarpIN installer, 7/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r351-os2.wpi
FAT32 v. 0.10b R349 (WarpIN installer, 6/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r349-os2.wpi
FAT32 v. 0.10b R349 (ZIP format, 6/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r349-os2.zip
FAT32 v. 0.10b R338 (WarpIN installer, 11/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required). * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r338-os2.wpi
FAT32 v. 0.10b R338 (ZIP format, 11/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required). * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r338-os2.zip
FAT32 v. 0.10b R337 (WarpIN installer, 8/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r337-os2.wpi
FAT32 v. 0.10b R337 (ZIP format, 8/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r337-os2.zip
FAT32 v. 0.10b R336 (ZIP format, 15/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r336-os2.zip
FAT32 v. 0.10b R336 (WarpIN installer, 15/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r336-os2.wpi
FAT32 v. 0.10b R333 (WarpIN installer, 11/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r333-os2.wpi
FAT32 v. 0.10b R333 (ZIP format, 11/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r333-os2.zip
FAT32 v. 0.10b R332 (WarpIN installer, 10/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r332-os2.wpi
FAT32 v. 0.10b R332 (ZIP format, 10/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r332-os2.zip
FAT32 v. 0.10b R331 (WarpIN installer, 10/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r331-os2.wpi
FAT32 v. 0.10b R331 (ZIP format, 10/11/2017, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r331-os2.zip
FAT32 v. 0.10b R330 (WarpIN installer, 7/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r330-os2.wpi
FAT32 v. 0.10b R330 (ZIP format, 7/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r330-os2.zip
FAT32 v. 0.10b R329 (WarpIN installer, 6/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r329-os2.wpi
FAT32 v. 0.10b R329 (ZIP format, 6/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r329-os2.zip
FAT32 v. 0.10b R326 (WarpIN installer, 15/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r326-os2.wpi
FAT32 v. 0.10b R326 (ZIP format, 15/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r326-os2.zip
FAT32 v. 0.10b R321 (WarpIN installer, 3/10/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r321-os2.wpi
FAT32 v. 0.10b R321 (ZIP format, 3/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r321-os2.zip
FAT32 v. 0.10b R316 (WarpIN installer, 28/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r316-os2.wpi
FAT32 v. 0.10b R316 (ZIP format, 28/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r316-os2.zip
FAT32 v. 0.10b R315 (ZIP format, 26/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r315-os2.zip
FAT32 v. 0.10b R315 (WarpIN installer, 26/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r315-os2.wpi
FAT32 v. 0.10b R314 (ZIP format, 25/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r314-os2.zip
FAT32 v. 0.10b R314 (WarpIN installer, 25/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r314-os2.wpi
FAT32 v. 0.10b R310 (ZIP format, 17/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r310-os2.zip
FAT32 v. 0.10b R310 (WarpIN installer, 17/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r310-os2.wpi
FAT32 v. 0.10b R304 (ZIP format, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r304-os2.zip
FAT32 v. 0.10b R304 (WarpIN installer, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r304-os2.wpi
FAT32 v. 0.10b R306 (ZIP format, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r306-os2.zip
FAT32 v. 0.10b R306 (WarpIN installer, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r306-os2.wpi
FAT32 v. 0.10b R301 (ZIP format, 31/8/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r301-os2.zip
FAT32 v. 0.10b R301 (WarpIN installer, 31/8/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r301-os2.wpi
FAT32 v. 0.9.13 (WarpIN installer, 7/12/2008, Netlabs)
 ftp.netlabs.org/pub/fat32/fat32_0913.wpi
FAT32 v. 0.9.13 (ZIP format, 7/12/2008, Netlabs)
 ftp.netlabs.org/pub/fat32/fat32_0913.zip
Record updated last time on: 07/10/2023 - 05:35

Translate to...

Add new comment