FAT32

Version: 
0.10b
Release date: 
Monday, 17 September, 2018

License:

Interface:

Authors/Port authors:

FAT32.IFS for OS/2 will allow you to access FAT32 partitions (max 32 Gb, non removable) from OS/2. You cannot create or format FAT32 partitions: you'll still need Winxx to do that. Also, OS/2 CHKDSK cannot fix all possible errors that can occur, you'll have to use Windows Scandisk to fix certain errors.

To format natively removable devices, there are two options:

This software is distributed as compressed package. You have to download and manually install it; if prerequisites are required, you will have to manually install them too.

Manual installation

Available both as ZIP and WarpIN package:

  • download the ZIP package to temporary directory and unpack it to destination folder;
  • the WarpIN package is self-installing.

See below for download link(s).

For non-LVM systems ONLY: PARTFILT.FLT and OS2DASD.F32.

Since version 0.95 Extended Attributes Support (/EAS parameter in config.sys) is enabled by default.

PLEASE, NOTE: starting with version 0.97:

  • it is recommended you uninstall any earlier version of the FAT32 driver either manually or using WarpIN, if WarpIN was used to install the driver! Verify that IFS=X:\OS2\BOOT\FAT32.IFS and CALL=X:\OS2\CACHEF32.EXE lines are removed from x:\config.sys file;
  • it is recommended that you run CHKDSK : /F on every FAT32 partition that you have after installing the new version.

Following ones are the download links for manual installation:

FAT32 v. 0.10 r364 (ZIP format, 17/9/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r364-os2.zip
FAT32 v. 0.10 r364 (WarpIN installer, 17/9/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r364-os2.wpi
FAT32 v. 0.10b R361 (ZIP format, 28/7/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r361-os2.zip
FAT32 v. 0.10b R361 (WPI installer, 28/7/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like - * exFAT support ("/exfat" switch is required). - * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT - * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT - * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). - * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). - * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. - * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/ dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). - * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r361-os2.wpi
FAT32 v. 0.10b R359 (ZIP format, 29/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * exFAT support ("/exfat" switch is required). * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r359-os2.zip
FAT32 v. 0.10b R359 (WarpIN installer, 29/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * exFAT support ("/exfat" switch is required). * 64 KB clusters support on FAT, up to 32 MB clusters support on exFAT * Support for files up to 4 GB on FAT12/FAT16/FAT32, up to 16 EB on exFAT * Support for ​FAT+ -- files larger than 4 GB on FAT32 (a /plus switch is required). * Support for VFAT LFN's on FAT12/FAT16/FAT32 (for that, you should specify /fat key for fat32.ifs). * Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * Support for mounting FAT12/16/32/exFAT filesystem images on a FAT12/16/32/exFAT disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (a library was ported from ​QEMU for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2 (alpha-quality feature).
 osfree.org/upload/fat32/fat32-0.10-r359-os2.wpi
FAT32 v. 0.10b R351 (ZIP format, 7/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r351-os2.zip
FAT32 v. 0.10b R351 (WarpIN installer, 7/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r351-os2.wpi
FAT32 v. 0.10b R349 (WarpIN installer, 6/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r349-os2.wpi
FAT32 v. 0.10b R349 (ZIP format, 6/5/2018, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow/qcow2/vdi formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet). * - Support for mounting a disk image with any file system with loop.add driver. You can mount FAT/HPFS/JFS/NTFS/ISO9660/UDF file systems, or any other file system which has an IFS for OS/2.
 osfree.org/upload/fat32/fat32-0.10-r349-os2.zip
FAT32 v. 0.10b R338 (WarpIN installer, 11/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required). * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r338-os2.wpi
FAT32 v. 0.10b R338 (ZIP format, 11/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required). * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r338-os2.zip
FAT32 v. 0.10b R337 (WarpIN installer, 8/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r337-os2.wpi
FAT32 v. 0.10b R337 (ZIP format, 8/3/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r337-os2.zip
FAT32 v. 0.10b R336 (WarpIN installer, 15/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r336-os2.wpi
FAT32 v. 0.10b R336 (ZIP format, 15/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r336-os2.zip
FAT32 v. 0.10b R333 (WarpIN installer, 11/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r333-os2.wpi
FAT32 v. 0.10b R333 (ZIP format, 11/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r333-os2.zip
FAT32 v. 0.10b R332 (WarpIN installer, 10/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r332-os2.wpi
FAT32 v. 0.10b R332 (ZIP format, 10/2/2018, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r332-os2.zip
FAT32 v. 0.10b R331 (WarpIN installer, 10/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r331-os2.wpi
FAT32 v. 0.10b R331 (ZIP format, 10/11/2017, Valery Sedletski (valerius)) Readme/What's new
1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like * - 64 KB clusters support * - support for files up to 4 GB * - support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). * - exFAT support ("/exfat" switch is required).) * - Support for ​FAT+ (a /plus switch is required). * - Supported different media, like floppies (physical and virtual), CD's, flash sticks and hard disks with FAT12/FAT16/FAT32/exFAT filesystems. For all these media types, FORMAT/CHKDSK/SYS should work. * - Support for mounting FAT12/16/32/ex filesystem images on a FAT12/16/32/ex disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r331-os2.zip
FAT32 v. 0.10b R330 (WarpIN installer, 7/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r330-os2.wpi
FAT32 v. 0.10b R330 (ZIP format, 7/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r330-os2.zip
FAT32 v. 0.10b R329 (WarpIN installer, 6/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r329-os2.wpi
FAT32 v. 0.10b R329 (ZIP format, 6/11/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work. Support for mounting FAT[/12/16/32/ex] filesystem images on a FAT[/12/16/32/ex] disk subdirectory. Raw/bochs/cloop/dmg/vpc/vmdk/parallels/vvfat/qcow formats are supported. (qemu code was used for support of VM images). For partitioned images, a partition number could be specified. Support for CHKDSK/FORMAT/SYSINSTX on a mounted image (this feature is alpha-quality, yet).
 osfree.org/upload/fat32/fat32-0.10-r329-os2.zip
FAT32 v. 0.10b R326 (WarpIN installer, 15/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r326-os2.wpi
FAT32 v. 0.10b R326 (ZIP format, 15/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r326-os2.zip
FAT32 v. 0.10b R321 (WarpIN installer, 3/10/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r321-os2.wpi
FAT32 v. 0.10b R321 (ZIP format, 3/10/2017) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r321-os2.zip
FAT32 v. 0.10b R316 (ZIP format, 28/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r316-os2.zip
FAT32 v. 0.10b R316 (WarpIN installer, 28/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r316-os2.wpi
FAT32 v. 0.10b R315 (ZIP format, 26/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r315-os2.zip
FAT32 v. 0.10b R315 (WarpIN installer, 26/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required). For all these media types, FORMAT/CHKDSK/SYS should work.
 osfree.org/upload/fat32/fat32-0.10-r315-os2.wpi
FAT32 v. 0.10b R314 (ZIP format, 25/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r314-os2.zip
FAT32 v. 0.10b R314 (WarpIN installer, 25/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r314-os2.wpi
FAT32 v. 0.10b R310 (ZIP format, 17/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r310-os2.zip
FAT32 v. 0.10b R310 (WarpIN installer, 17/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r310-os2.wpi
FAT32 v. 0.10b R304 (ZIP format, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r304-os2.zip
FAT32 v. 0.10b R304 (WarpIN installer, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r304-os2.wpi
FAT32 v. 0.10b R306 (ZIP format, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r306-os2.zip
FAT32 v. 0.10b R306 (WarpIN installer, 10/9/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r306-os2.wpi
FAT32 v. 0.10b R301 (ZIP format, 31/8/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r301-os2.zip
FAT32 v. 0.10b R301 (WarpIN installer, 31/8/2017, Valery Sedletski (valerius)) Readme/What's new
This version includes: 1) FORMAT routine, based on Fat32format (a win32 program) 2) CHKDSK, with autocheck on init support. 3) SYS routine, installing FreeLDR bootblock (no minifsd yet). 4) Some new features, like 64 KB clusters support and support for files up to 4 GB, support for VFAT on FAT12/FAT16 (for that, you should specify /fat key for fat32.ifs). Early exFAT support ("/exfat" switch is required).
 osfree.org/upload/fat32/fat32-0.10-r301-os2.wpi
FAT32 v. 0.9.13 (WarpIN installer, 7/12/2008, Netlabs)
 ftp.netlabs.org/pub/fat32/fat32_0913.wpi
FAT32 v. 0.9.13 (ZIP format, 7/12/2008, Netlabs)
 ftp.netlabs.org/pub/fat32/fat32_0913.zip
Record updated last time on: 17/09/2018 - 21:45

GTranslate

English Dutch French German Korean Russian Swedish

Add new comment