Oak Technology Video Drivers

OTI 067/077 OS/2 2.1 Resolution Support: 067 or 077 with 512k video memory use 640x480 256 colors only. 077 with 1 Meg video memory use any of the following : 640x480 256 colors 800x600 256 colors 1024x768 256 colors OTI 067/077 OS/2 2.1 Driver Installation: These files must be copied to a diskette labelled as follows: OS2 DRVS This install requires that the 32-bit VGA (or our 32-bit SVGA) driver is currently installed. To install the drivers: 1. Place OS/2 Drivers diskette into drive A (or other floppy drive). 2. Open an OS/2 session (full-screen or window). 3. Enter the following command: A:OS2INS A: C: where: A: is the floppy drive C: is the OS/2 boot drive 4. OS2INS.CMD will copy files to the OS/2 drive, present a message indicating that it is about to start the OS/2 Display Driver Install utility (DSPINSTL), and prompt the user to press any key. 5. When the Display Driver Install main panel appears, the Primary Display should indicate Video Graphics Array. If so, select OK and proceed to step 6. If Video Graphics Array is not indicated, select Primary Display and click on OK. 6. Highlight the Driver/Resolution desired and click on OK. 7. When the Source Directory panel appears, choose the floppy drive that contains the OS/2 Driver diskette and click on Install. 8. When the main panel appears again, click on Cancel. 9. A message box will appear, indicating that the user must perform a shutdown so that the changes will take effect. Click on OK. 10. Perform a shutdown and restart the system.