Network Time Protocol Client for OS/2 Warp

Versione: 
1.7
Data rilascio: 
Lunedì, 12 Luglio, 1993

Licenza:

Interfaccia:

Authors/Port authors:

OS2_NTPD è un'applicazione NTP client, multi-thread a 32-bit in modalitá testo eseguibile in una finestra VIO del Presentation Manager o in modo detach.

Questo software è distribuito come pacchetto compresso, da scaricare e installare manualmente; se ci sono prerequisiti da soddisfare, andranno anch'essi scaricati e installati manualmente.

Installazione manuale

Il programma è distribuito come pacchetto ZIP: scaricare in una cartella temporanea e scompattare nella cartella di destinazione. Vedi sotto per il(i) link di download.

Qui di seguito trovi i link di download per l'installazione manuale del software:

Network Time Protocol Client for OS/2 Warp v. 1.7 (beta, 11/4/2023, Steven Levine) Readme/What's new
User's Guide to OS2_NTPD, Network Time Protocol Client for OS/2 Warp Release 1.7beta, April 11, 2023 originally written by Bruce M. Penrod maintained by Steven H. Levine (steve53@earthlink.net) I. Introduction OS2_NTPD is a 32-bit, multi-threaded, text mode, NTP client application that runs in a Presentation Manager VIO text window or can be run detached. It requires either OS/2 2.1 with TCP/IP version 2.0 or OS/2 version 3.0 or 4.0 (aka WARP or WARP Connect) to operate. It must reside on an OS/2 compatible volume. The following three files must be present: 1) os2_ntpd.exe The main program. 2) portio.dll A dynamic link library which gives os2_ntpd.exe access to the I/O ports and thereby the real time clock chip. It must reside in a directory included in the LIBPATH= statement of the config.sys. 3) cfg_data An data file containing the list of NTP servers to poll and the initial polling interval. This file is required unless OS2_NTPD is run in single server mode. This file must reside in the current working directory. In addition, tcp32dll.dll and so32dll.dll must be present on the system in a directory which is included in the LIBPATH= statement in the config.sys. After OS2_NTPD has been executed the first time, these additional files will be created in the working directory: 1) rtc_type A data file containing the type of real time clock chip present on the system board. There are two different types, indicated by a value of either 0 or 500 in this file. 2) drift A data file containing two data items - the NTP timestamp rounded to whole seconds of the last correction that was made to the real time clock and the fractional frequency offset of the real time clock timebase. A positive means that the system clock is fast. It may take several hours for this file to appear the first time. 3) suspects When debugging is enabled, data file containing server reply packets which differ from the client ensemble clock by more than 250 ms. This file may grow without bound, so it should be checked and deleted from time to time. The format of these packets is identical to that which is displayed on the user interface screen) In addition, when logging is turned on, then an OS2_NTPD log file with name of the form os2_ntpd-20200220-1112.log will be created. These can accumulate over time so you might want to implement a cron action to delete the stale log files. The log file will be written to the directory named by %LOGFILES%, %TEMP%, %TMP% or the current directory. When OS2_NTPD is running in the foreground, this log file will contain a list of the NTP servers which were present in the cfg_data file when OS2_NTPD first started, followed by an NTP timestamp column which is followed by three columns for each server of statistics on the time received from that server. These statistics are the current raw measurement of that (server - client), the mean of these raw measurements taken over approximately twenty samples, and the standard deviation of these raw measurements. After the statistics for each of the servers come columns which contain the ensemble statistics. The first ensemble statistic is the ensemble, or weighted average of all of the (server - client) raw measurements. This is followed by the standard deviation of the ensemble. Next is the phase locked loop filter output value, followed by the fractional frequency offset of the local clock timebase, followed finally by the actual clock correction in seconds applied to the system clock. When OS2_NTPD is running detached, an OS2_NTPD log file will always be created. Errors that would be reported to the screen when running in the foreground will be written to log file. In addition, the current poll interval will be reported every six hours. When running detached, the -l command line option is available to increase the verbosity of the output With the -l option, the status output will report every clock update. This will result in a large log file. The content of the OS2_NTPD logfile is most useful for debugging. II. Installation *********************************IMPORTANT************************************ If you are upgrading from version 1.0, you MUST replace both the os2_ntpd.exe and the portio.dll files. The version of portio.dll included with version 1.0 IS NOT COMPATIBLE with version 1.2. ****************************************************************************** Installation is simple, just create a directory and unzip the distribution file, into it. In addition, check the system config.sys file on the OS/2 boot partition and make sure that the line: IOPL=YES is present. If it is not or is set equal to NO, change it. OS2_NTPD MUST HAVE ACCESS to I/O ports in order to read and set the system real time clock chip. As an alternative to providing broad IOPL access, specific access to certain executables is possible, for example: IOPL=os2_ntpd.exe is also OK. OS2_NTPD ships with a default cfg_data file. Currently, this file contains: cfg_data poll interval = 16 us.pool.ntp.org 0.us.pool.ntp.org 1.us.pool.ntp.org 2.us.pool.ntp.org pool.ntp.org 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org Each line must be terminated by a CR and LF. The cfg_data and poll internal lines are required and must appear in the order shown. Up to 22 NTP servers may be listed following the poll_interval line. The servers may be listed by name or by IP address. Blank lines are allowed as are comment lines beginning with ; or #. Since NTP is based on UTC time, it will be necessary to set the environment variable TZ so that the local offset to UTC may be maintained when OS2_NTPD is operating on the system clock. A statement like this must appear somewhere in your config.sys: SET TZ=PST+8PDT This example is appropriate for users on the west coast of the USA who operate with Pacific Standard Time (PST) or Pacific Daylight Time (PDT) and are 8 hours behind UTC when PST is in effect. If daylight time is not used, leave off the last three characters: SET TZ=PST+8 To set TZ for more complicated situations, use the following format: ┌──────────────────────────────────────────────────────────────────────────────┐ │ │ │ >>──SET──TZ──=──SSS──┬──────────────────────────────┬──────────────────────> │ │ └─┬───┬──h──┬────────────────┬─┘ │ │ ├─+─┤ └─:──m──┬──────┬─┘ │ │ └─┴─┘ └─:──s─┘ │ │ │ │ >──┬─────────────────────────────────────────┬────────────────────────────>< │ │ └─DDD──┬────────────────────────────────┬─┘ │ │ └─,sm,sw,sd,st,em,ew,ed,et,shift─┘ │ │ │ └──────────────────────────────────────────────────────────────────────────────┘ The values for the TZ variable are defined below. The default values given are for the built-in "C" locale defined by the ANSI C standard. ┌──────────────────────────────────────────────────────────────────────────────┐ │ Table 1. TZ Environment Variable Parameters │ ├──────────────┬─────────────────────────────────────────────┬─────────────────┤ │ VARIABLE │ DESCRIPTION │ DEFAULT VALUE │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ SSS │ Standard-timezone identifier. It must be │ EST │ │ │ three characters, must begin with a letter, │ │ │ │ and can contain spaces. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ h, m, s │ The variable h specifies the difference (in │ 5 │ │ │ hours) between the standard time zone and │ │ │ │ coordinated universal time (CUT), formerly │ │ │ │ Greenwich mean time (GMT). You can │ │ │ │ optionally use m to specify minutes after │ │ │ │ the hour, and s to specify seconds after │ │ │ │ the minute. A positive number denotes time │ │ │ │ zones west of the Greenwich meridian; a │ │ │ │ negative number denotes time zones east of │ │ │ │ the Greenwich meridian. The number must be │ │ │ │ an integer value. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ DDD │ Daylight saving time (DST) zone identifier. │ EDT │ │ │ It must be three characters, must begin │ │ │ │ with a letter, and can contain spaces. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sm │ Starting month (1 to 12) of DST. │ 4 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sw │ Starting week (-4 to 4) of DST. Use nega- │ 1 │ │ │ tive numbers to count back from the last │ │ │ │ week of the month (-1) and positive numbers │ │ │ │ to count from the first week (1). │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sd │ Starting day of DST. │ 0 │ │ │ 0 to 6 if sw != 0 │ │ │ │ 1 to 31 if sw = 0 │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ st │ Starting time (in seconds) of DST. │ 3600 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ em │ Ending month (1 to 12) of DST. │ 10 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ ew │ Ending week (-4 to 4) of DST. Use negative │ -1 │ │ │ numbers to count back from the last week of │ │ │ │ the month (-1) and positive numbers to │ │ │ │ count from the first week (1). │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ ed │ Ending day of DST. │ 0 │ │ │ 0 to 6 if ew != 0 │ │ │ │ 1 to 31 if ew = 0 │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ et │ Ending time of DST (in seconds). │ 7200 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ shift │ Amount of time change (in seconds). │ 3600 │ └──────────────┴─────────────────────────────────────────────┴─────────────────┘ For example: SET TZ=CST6CDT sets the standard time zone to CST, the daylight saving time zone to CDT, and sets a difference of 6 hours between CST and CUT. It does not set any values for the start and end date of daylight saving time or the time shifted. When TZ is not present, the default is EST5EDT, the "C" locale value. When only the standard time zone is specified, the default value of n (difference in hours from GMT) is 0 instead of 5. If you give values for any of sm, sw, sd, st, em, ew, ed, et, or shift, you must give values for all of them. Otherwise the entire statement is considered not valid, and the time zone information is not changed. III. About the Real Time Clock For system timekeeping and task scheduling, OS/2 uses the Motorola MC146818 RTC chip which IBM originally designed into the AT machines. Prior to FixPak 26 for Warp v3 and FixPak 1 for Warp v4, OS/2 set the chip up to generate an interrupt 32 times a second, or every 31.25 ms. With the application of these FixPaks, the chip is now set up to generate an interrupt 128 times a second, or every 7.8125 ms. OS2_NTPD performs system clock corrections by actually resetting the RTC chip at the appropriate time so as to step the time in increments as small as one of the original ticks, or 31.25 ms, forward or backward. This works beautifully for motherboards which emulate the Motorola RTC chip faith- fully. However, some motherboards incorrectly emulated the chip and this causes hiccups in the time adjustments performed by OS2_NTPD on occasion. For- tunately, since the advent of the Pentium based motherboards with predominantly Intel chipsets, this problem is not as widespread and is probably limited only to older 486 systems. I have never seen a Pentium machine with an incorrectly implemented RTC. The difference is in how the chips behave after divisor reset, the method of timestepping used by OS2_NTPD. Truly compatible implementations update the next second 500 ms after divisor reset. The other implementations I have seen update it immediately following divisor reset. This causes problems when a small, single tick correction is being made and the actual time that it is performed slips by a tick due to pre-emption, etc. This slip causes a whole second error to occur instead of one tick. I have not successfully eliminated these occurrences yet, however they are rare. They seem to be worst on heavily loaded systems and systems running dial-up serial modems using PPP, which runs at a very high priority. Following the initial execution of OS2_NTPD, the data file rtc_type will hold the results of its check for the type of RTC chip in your system. If the value stored in rtc_type is zero, then your RTC is 100% compatible and you should have no problems such as I have described. If the value is 500, then you should expect to experience the one second hiccups from time to time if your system is underpowered or heavily loaded or are accessing the Internet via dial- up modem. IV. Operation OS2_NTPD is a typical OS/2 text mode (VIO) application and can be executed in a number of different ways: 1) From the command line and accessing a single server using command line arguments: os2_ntpd.exe [ntp server(name or dotted decimal) initial polling interval (integer seconds) number of requests to send (integer)] where: "ntp server" is the IP address of the NTP server (i.e. tick.usno.navy.mil or 206.54.0.21). "initial polling interval" is the number of seconds between requests to the server. It should be a power of two, such as 2, 4, 8, 16 etc. "number of requests to send" is how many times to request time from the server, if 0 is entered then requests will be sent indefinitely. All of these arguments must be separated by spaces. The first argument is required. The initial polling interval defaults to 16 when omitted. The number of requests defaults to 1 if omitted. 2) From the command line with no arguments. When executed this way, OS2_NTPD looks for the configuration file cfg_data in the current directory. If the configuration file cannot be accessed, OS2_NTPD will display an error message and terminate. If the cfg_data file exists and is correctly formatted, then OS2_NTPD will display the contents of the file in the window and begin normal operation. Of course, a Workplace Shell program object may be created allowing execution via mouse clicks, and a copy of the program object could be dragged to the Startup Folder to allow automatic invocation following each boot up. 3) It is also possible to run OS2_NTPD detached. To run OS2_NTPD detached, use a command line like: detach OS2_NTPD V. The OS2_NTPD User Interface When OS2_NTPD is run in the foregroud, after reading the cfg_data file and displaying the server list, the program will initialize the user interface screen. This screen is a standard 25 line by 80 character text mode window, divided into three regions. The top region consists of thirteen lines which display decoded packets, the list of NTP servers and other data that can be requested. The next region consists of three lines displaying output status information such as timeouts, reply packets which are indicating an alarm state, ensemble statistics, etc. The bottom five lines display the 12 item user menu, not all of which are in use at this time. Menu items can be selected by function key number or by alphabetic hotkey. The hotkey letters are highlighted in the menu text. The hotkeys are useful when OS2_NTPD is run via VNC or telnet and the function keys are not well supported. The current set of available menu items and the associated function keys are: F1 Show Next Pkt -- Pressing this key will display the decoded packet received from the first server from which a reply was received in the current polling interval. Pressing it again will display the next one and so on. Underneath the raw packet information are displayed the server specific timing statistics: the current server - client offset measurement in seconds, the standard deviation of those measurements, and the maximum and minimum measurements. F2 Show Prev Pkt -- Pressing this key will display the decoded packet received from the last server from which a reply was received in the current polling interval. Pressing it again will display the previous one and so on. F6 Quick Sync -- Pressing this key will enable an instantaneous "jam sync" of the system clock based on the next ensemble of replies received from the active servers. The default behavior if this key is not pressed is to propagate the ensembled replies through a phase locked loop filter which will slowly bring the system clock in line with the NTP servers. The Quick Sync function is similar to NTPDATE in that it is used to establish a starting synchronization which is then refined based on further averaging of NTP server replies and gradual corrections. F7 Show Peers -- Pressing this key will display a list of the peers which were active during the current polling interval. Pressing this key again will toggle to a display showing the configured peers and the timestamp of the last response for each peer. F10 Enable Debug -- Pressing this key will enable logging of suspect reply packets to a file named "suspects" in the OS2_NTPD working directory. This file will be opened for appending and closed after each polling interval. Pressing the key again will suspend logging to this file. F11 Open LogFile -- Pressing this key the first time will open the OS2_NTPD log file. This log file will be opened for appending and closed after each polling interval and contains the reduced timing data from each of the servers in the cfg_data file, as well as ensemble statistics. Once the log file is open, pressing the key again will close the file permanently. F12 About -- Pressing this key will display information about this program. VI. Theory of Operation Interested users should consider downloading the RFCs relating to network timing written by David Mills of the University of Delaware. These cover in gory detail the inner workings of the NTP. Mills also maintains a website, http: //www.eecis.udel.edu/~ntp/ which is a vast repository of NTP related lore and entertainment. OS2_NTPD operates based on version 3.0 of the NTP as described in RFC 1305. Here I will only mention that the cornerstone of the NTP is server diversity. The benefits of statistical ensembling and clustering are not available if only one server is being polled. OS2_NTPD allows up to 22 servers to be configured for this reason. OS2_NTPD maintains stability measurements on each server being used to set the client clock. These stability measures are used to calculate weighting of the individual server's contribution to the overall ensemble. Noisy servers receive less weighting, quiet ones more. Further, due to the ordering of the procedures, when a measurement comes in from a server, its weight is updated first, then the measurement is added into the ensemble based on the new weight. This provides a measure of immunity from bad server replies since they are de-weighted prior to being used. Once an ensemble measurement has been synthesized, it is passed to the phase locked loop which controls the system clock. The phase locked loop implements averaging of the NTP server reply data across time as opposed to the ensembling algorithm which implements averaging across multiple servers. Initially the PLL operates fairly quickly and updates the RTC at the rate specified by the initial polling interval parameter provided in the cfg_data file or from the command line. Once the client clock has been pulled within a tick (31.25 ms) then the polling interval is lengthened by a factor of two. Each time the ensemble measurement is within a tick, the polling interval is again lengthened until it reaches 256 seconds, beyond which it does not extend. After the polling interval has reached 256 seconds, PLL averaging is further extended by modifying the coefficients in the digital loop filter. These are allowed to extend until the PLL equivalent averaging time has reached 13,401 seconds. The main reason for setting the averaging time so long is to allow an accurate measurement of the frequency offset of the client clock timebase. This frequency offset has been referred to as "skew" in the Mills literature. Unfortunately, the file created by the Unix versions of NTP containing this skew term is called NTPDRIFT. Drift has actually been defined by the global time and frequency community to mean the change in frequency of an oscillator as a function of time, not its change in phase. So as not to confuse those who have dealt with the various ports of Mills' NTP client daemons, I have retained the " drift" naming convention for the file which holds the fractional frequency offset of the client clock timebase. OS2_NTPD uses this "drift" to extrapolate the behavior of the client clock when no servers are available, so that corrections may continue to be made to the clock to compensate for its assumed constant frequency error. In addition, after a power outage, OS2_NTPD checks the timestamp in the "drift" file to determine the length of the outage and will apply a correction based on the outage duration and the fractional frequency offset which was stored in the "drift" file. This approach is not fool proof, since corrections made manually or by other programs during the outage of OS2_NTPD operation will not be known to OS2_NTPD. Also, the frequency of the crystal oscillator inside of the PC will be different when the power is applied as compared to when it is not since the temperature inside the PC is dependent upon this. VII. Current known deficiencies in this version of the OS2_NTPD NTP Client: 1) The Leap Indicator bits are currently used only to detect server alarm condition. No attempt is made to transparently implement any leap second event at the correct time. This may be fixed in the future when more servers properly indicate leap second events in these bits, which is not the case now! 2) The movement of time from Standard to Daylight and vice versa currently propagates through the PLL loop filter and used to take a very slow journey -- maybe an hour or so for the oscillations to die out. Version 1.4 added logic to speed up the transition. However, it will still take a couple of sample times for the loop oscillations to die out. If this is a problem in your environment, it is recommended that you do not run your workstations on anything but Standard time, be it local or UTC. 2) No preference is currently given to servers based on their operating NTP stratum level or root dispersion. 3) Failing servers in the cfg_data server list, can cause OS2_NTPD to be noticeably slow to perform the first clock update. If OS2_NTPD has derived an accurate "drift" value, this will have no affect on OS2_NTPD's ability to keep the clock accurate, but it can be visually disconcerting It is recommended that you check the NTP server list periodically. The NTP protocol supports failing servers well, but there is no benefit to including a server than has been shut down in the list. 4) Starting OS2_NTPD on a system with a detached network cable will result in noticeably slow startup because every DNS query will fail. As with any network error, if OS2_NTPD has derived an accurate "drift" value, this will have no effect on OS2_NTPD's ability to keep the clock accurate. VIII. Version History Changes in version 1.7 of OS2_NTPD - Correct command line parsing regression. - Correct VioGetMode call error. - Clean up VIO function usage. Changes in version 1.6 of OS2_NTPD - Enhance Show Peer display to toggle between responding peers and configured peers. Configured peers format shows timestamp of last response. This allows problem peers to be more easily identified. - Support comments and blank lines in cfg_data. Comment lines can begin with ; or #. - Report ensemble offset with indentifying RTC type. This allows RTC detection errors to be analyzed. Changes in version 1.5 of OS2_NTPD - Forced DNS lookup retrans delay to one second and retry count to one so that non-responsive time servers and name servers or cabling issues have less effect on packet query time and visible startup delay. - Report non-responsive servers every 6 hours if running detached. Changes in version 1.4 of OS2_NTPD - Write log file to %LOGFILES% directory if defined in environment. - Add support for running detached. - Optimize code paths. - Add more error logic. - Add fix to suppress DST changeover oscillation. - Ensure running codepage 437. Changes in version 1.3 of OS2_NTPD - Port to OpenWatcom. - Add support for menu hotkeys. Bugfixes included in version 1.2 of OS2_NTPD This was Bruce Penrod's final release. 1) This version fixes the problems which were introduced when IBM changed the tick rate of the RTC from 32 Hz to 128 Hz. The program now detects the rate at which the RTC has been set to generate an interrupt and operates ap- propriately for either case. One would think that the new higher rate would allow an improvement in the setting of the clock, however the opposite is the case. With the introduction of the higher tick rate, timetagging resolution has been improved, so that calls to ftime() now return a precision of 10 ms. Unfortunately, the other half of the problem, the ability to have something done at a certain time using a timer function like DosSleep(), has not been improved to the 10 ms level. The net effect is that there is more uncertainty now in the setting of the RTC chip, so that typical performance is still at the 30 ms level. Bugfixes included in version 1.1 of OS2_NTPD: 1) Some versions of OS/2 Warp Connect with various FixPacks at about 17 were unable to run version 1.0 of the program, aborting with a "Stack Overflow" message immediately following start-up. I changed the compiler from Borland 1.5 to IBM VAC++ 3.0, increased the stacksize in the threads and rearranged the operation of the threads to eliminate the possibility of clean-up not being performed. These systems are now able to run the program but there are still some questions concerning memory leakage and system lock-ups on those same systems. I will be welcoming any feedback as to whether I have fixed those problems! 2) Borland did not do a very good job on the TZ environment variable in their tzset() routine, choosing to have it handle only North American time zone changes properly. Since changing to the IBM compiler for this version, OS2_NTPD fully supports the TZ environment variable as described in this manual so that both standard time and daylight time may work anywhere in the world if the TZ variable is set up properly. 3) The REF ID field of the NTP packet was not being decoded properly with servers operating at Stratum 2 or higher in version 1.0 of OS2_NTPD. It should have shown the IP address of the server to which that server is peered rather than the ascii clock type code like GPS or ACTS as would be done for Stratum 1 servers. 4) Some users with non-compatible RTC implementations have experienced the one second hiccups in the RTC correction process that is described in this manual. In version 1.1, I have managed to reduce them to an acceptable level on my machines by giving up some of the resolution of the correction. What this amounts to is that when I detect the RTC type, if it is a non- compatible one, I perform two tick clock adjustments instead of single tick adjustments. Due to the subtleties of the adjustment process, this still allows me to maintain an accuracy of about one tick, or 31.25 ms but greatly reduces the frequency of the hiccups. 5) Fixed a potential string overflow problem when extremely large offsets between the local clock and a server were being displayed. DISCLAIMER!!! The author and maintainer makes no claims concerning suitability of this program for any use. OS2_NTPD is offered for your use "as is", with no expressed or implied warranties or guarantees of any kind. The author and maintainer will assume no liability for damages either from the direct use of this product or as a consequence of the use of this product.
 www.warpcave.com/betas/os2_ntpd-1.7beta-shl-2023-04-11.zip  local copy
Network Time Protocol Client for OS/2 Warp v. 4.2.0 (29/11/2015, Steven Levine) Readme/What's new
This is a os2 port build 5 of ntp-4.2.0. The Network Time Protocol (NTP) is used to synchronize the time of a computer client or server to another server or reference time source, such as a radio or satellite receiver or modem. It provides accuracies typically within a millisecond on LANs and up to a few tens of milliseconds on WANs relative to Coordinated Universal Time (UTC) via a Global Positioning Service (GPS) receiver, for example. Typical NTP configurations utilize multiple redundant servers and diverse network paths in order to achieve high accuracy and reliability. ntpd - Network Time Protocol (NTP) daemon ntpq - standard NTP query program ntpdc - special NTP query program ntpdate - set the date and time via NTP ntptrace - trace a chain of NTP servers back to the primary source ntp-keygen - generate public and private keys For detailed information about this program package see the original NTP 4 distribution ftp://ftp.udel.edu/pub/ntp/ntp4/ntp-4.2.0.tar.gz http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2.0.tar.gz or the NTP web site http://www.ntp.org/ OS/2 notes: - Requirements: -- InnoTek GCC LIBC v0.6 - libc06.dll - The current directory for ntp.conf is %ETC% or, if you have no defined ETC environment variable, \mptn\etc on the current drive. But you may use the -c command line option to redefine this default. - For bin.ssl: - The current directory for authentication keys is \mptn\etc\ntp on the current drive. But you may redefine it in ntp.conf file. - Put .rnd file into the home directory. Define HOME environment variable in your Config.Sys. - This program requires the TZ environment variable to be set correctly in order to have time zone and daylight savings time be recognized as needed in your location. Please see tzset.txt how to set TZ. The setting for central europe, for example, would be: SET TZ=CET-1CED,3,-1,0,7200,10,-1,0,10800,3600 or for Moscow: SET TZ=MSK-3MSD,3,-1,0,7200,10,-1,0,10800,3600 But ntpd for OS/2 does not work on a winter time from 2:00 to 3:00 in the last october sunday, because OS/2 does not have the synthetic time. Please stop ntpd at 2:59 of a summer time, start ntpdate at 3:00 of a winter time and restart ntpd. - This build was made with InnoTek GCC v3.3.5. The function adjtime() do not implemented yet. It may to tell on the precision of time calculating and setting. - ntptrace sources were gotten from ntp-4.1.80-rc1 distribution. - ssl part was built with openssl-0.9.7g distribution. My patches & fixes: - libntp: ./libntp/machines.c adjtime() was commented :-( - libntp: ./libntp/systime.c adjtime() was commented :-( - ntpd: ./ntpd/ntp_config.c Get ETC environment variable value to find ntp.conf - ntpdate: ./ntpdate/ntpdate.c adjtime() was commented :-( - ntptrace: ./ntptrace/ntptrace.c not initialized variable - openssl: ./crypto/rand/rand_os2.c impermissble variable`s names Special thanks: - nickk (Nick Lepehin) for technical advices and suggestions. Wishes: I am waiting for your comment about this port. Particularly for the authentication support. This part has been tested very little. Author of this port: Alex Porollo Contacts: ap@cbank.mari.ru 2:5052/5@fidonet
 hobbes.nmsu.edu/download/pub/os2/util/time/NTP_4-2-0b6.zip
Network Time Protocol Client for OS/2 Warp v. 1.4 (20/1/2015, Steven Levine) Readme/What's new
User's Guide to OS2_NTPD, Network Time Protocol Client for OS/2 Warp Release 1.4, January 20, 2015 originally written by Bruce M. Penrod maintained by Steven H. Levine (steve53@earthlink.net) I. Introduction OS2_NTPD is a 32-bit, multi-threaded, text mode, NTP client application that runs in a Presentation Manager VIO text window or can be run detached. It requires either OS/2 2.1 with TCP/IP version 2.0 or OS/2 version 3.0 or 4.0 (aka WARP or WARP Connect) to operate. It must reside on an OS/2 compatible volume. The following three files must be present: 1) os2_ntpd.exe The main program. 2) portio.dll A dynamic link library which gives os2_ntpd.exe access to the I/O ports and thereby the real time clock chip. It must reside in a directory included in the LIBPATH= statement of the config.sys. 3) cfg_data An data file containing the list of NTP servers to poll and the initial polling interval. This file is required unless OS2_NTPD is run in single server mode. This file must reside in the current working directory. In addition, tcp32dll.dll and so32dll.dll must be present on the system in a directory which is included in the LIBPATH= statement in the config.sys. After OS2_NTPD has been executed the first time, these additional files will be created in the working directory: 1) rtc_type A data file containing the type of real time clock chip present on the system board. There are two different types, indicated by a value of either 0 or 500 in this file. 2) drift A data file containing two data items - the NTP timestamp rounded to whole seconds of the last correction that was made to the real time clock and the fractional frequency offset of the real time clock timebase. A positive means that the system clock is fast. It may take several hours for this file to appear the first time. 3) suspects When debugging is enabled, data file containing server reply packets which differ from the client ensemble clock by more than 250 ms. This file may grow without bound, so it should be checked and deleted from time to time. The format of these packets is identical to that which is displayed on the user interface screen) In addition, if logging is turned on, then a log file with name equal to the NTP seconds (seconds since Jan 1, 1900) in hexadecimal at the time the log file was first opened and the extension ".log" is created. For example a typical log file name might be: b5afc01a.log This log file contains a list of the NTP servers which were present in the cfg_data file when the program was first executed, followed by an NTP timestamp column which is followed by three columns for each server of statistics on the time received from that server. These statistics are the current raw measurement of that (server - client), the mean of these raw measurements taken over approximately twenty samples, and the standard deviation of these raw measurements. After the statistics for each of the servers come columns which contain the ensemble statistics. The first ensemble statistic is the ensemble, or weighted average of all of the (server - client) raw measurements. This is followed by the standard deviation of the ensemble. Next is the phase locked loop filter output value, followed by the fractional frequency offset of the local clock timebase, followed finally by the actual clock correction in seconds applied to the system clock. II. Installation *********************************IMPORTANT************************************ If you are upgrading from version 1.0, you MUST replace both the os2_ntpd.exe and the portio.dll files. The version of portio.dll included with version 1.0 IS NOT COMPATIBLE with version 1.2. ****************************************************************************** Installation is simple, just create a directory and unzip the distribution file, into it. In addition, check the system config.sys file on the OS/2 boot partition and make sure that the line: IOPL=YES is present. If it is not or is set equal to NO, change it. OS2_NTPD MUST HAVE ACCESS to I/O ports in order to read and set the system real time clock chip. As an alternative to providing broad IOPL access, specific access to certain executables is possible, for example: IOPL=os2_ntpd.exe is also OK. Since NTP is based on UTC time, it will be necessary to set the environment variable TZ so that the local offset to UTC may be maintained when OS2_NTPD is operating on the system clock. A statement like this must appear somewhere in your config.sys: SET TZ=PST+8PDT This example is appropriate for users on the west coast of the USA who operate with Pacific Standard Time (PST) or Pacific Daylight Time (PDT) and are 8 hours behind UTC when PST is in effect. If daylight time is not used, leave off the last three characters: SET TZ=PST+8 To set TZ for more complicated situations, use the following format: ┌──────────────────────────────────────────────────────────────────────────────┐ │ │ │ >>──SET──TZ──=──SSS──┬──────────────────────────────┬──────────────────────> │ │ └─┬───┬──h──┬────────────────┬─┘ │ │ ├─+─┤ └─:──m──┬──────┬─┘ │ │ └─┴─┘ └─:──s─┘ │ │ │ │ >──┬─────────────────────────────────────────┬────────────────────────────>< │ │ └─DDD──┬────────────────────────────────┬─┘ │ │ └─,sm,sw,sd,st,em,ew,ed,et,shift─┘ │ │ │ └──────────────────────────────────────────────────────────────────────────────┘ The values for the TZ variable are defined below. The default values given are for the built-in "C" locale defined by the ANSI C standard. ┌──────────────────────────────────────────────────────────────────────────────┐ │ Table 1. TZ Environment Variable Parameters │ ├──────────────┬─────────────────────────────────────────────┬─────────────────┤ │ VARIABLE │ DESCRIPTION │ DEFAULT VALUE │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ SSS │ Standard-timezone identifier. It must be │ EST │ │ │ three characters, must begin with a letter, │ │ │ │ and can contain spaces. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ h, m, s │ The variable h specifies the difference (in │ 5 │ │ │ hours) between the standard time zone and │ │ │ │ coordinated universal time (CUT), formerly │ │ │ │ Greenwich mean time (GMT). You can │ │ │ │ optionally use m to specify minutes after │ │ │ │ the hour, and s to specify seconds after │ │ │ │ the minute. A positive number denotes time │ │ │ │ zones west of the Greenwich meridian; a │ │ │ │ negative number denotes time zones east of │ │ │ │ the Greenwich meridian. The number must be │ │ │ │ an integer value. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ DDD │ Daylight saving time (DST) zone identifier. │ EDT │ │ │ It must be three characters, must begin │ │ │ │ with a letter, and can contain spaces. │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sm │ Starting month (1 to 12) of DST. │ 4 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sw │ Starting week (-4 to 4) of DST. Use nega- │ 1 │ │ │ tive numbers to count back from the last │ │ │ │ week of the month (-1) and positive numbers │ │ │ │ to count from the first week (1). │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ sd │ Starting day of DST. │ 0 │ │ │ 0 to 6 if sw != 0 │ │ │ │ 1 to 31 if sw = 0 │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ st │ Starting time (in seconds) of DST. │ 3600 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ em │ Ending month (1 to 12) of DST. │ 10 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ ew │ Ending week (-4 to 4) of DST. Use negative │ -1 │ │ │ numbers to count back from the last week of │ │ │ │ the month (-1) and positive numbers to │ │ │ │ count from the first week (1). │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ ed │ Ending day of DST. │ 0 │ │ │ 0 to 6 if ew != 0 │ │ │ │ 1 to 31 if ew = 0 │ │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ et │ Ending time of DST (in seconds). │ 7200 │ ├──────────────┼─────────────────────────────────────────────┼─────────────────┤ │ shift │ Amount of time change (in seconds). │ 3600 │ └──────────────┴─────────────────────────────────────────────┴─────────────────┘ For example: SET TZ=CST6CDT sets the standard time zone to CST, the daylight saving time zone to CDT, and sets a difference of 6 hours between CST and CUT. It does not set any values for the start and end date of daylight saving time or the time shifted. When TZ is not present, the default is EST5EDT, the "C" locale value. When only the standard time zone is specified, the default value of n (difference in hours from GMT) is 0 instead of 5. If you give values for any of sm, sw, sd, st, em, ew, ed, et, or shift, you must give values for all of them. Otherwise the entire statement is considered not valid, and the time zone information is not changed. III. About the Real Time Clock For system timekeeping and task scheduling, OS/2 uses the Motorola MC146818 RTC chip which IBM originally designed into the AT machines. Prior to FixPak 26 for Warp v3 and FixPak 1 for Warp v4, OS/2 set the chip up to generate an interrupt 32 times a second, or every 31.25 ms. With the application of these FixPaks, the chip is now set up to generate an interrupt 128 times a second, or every 7.8125 ms. OS2_NTPD performs system clock corrections by actually resetting the RTC chip at the appropriate time so as to step the time in increments as small as one of the original ticks, or 31.25 ms, forward or backward. This works beautifully for motherboards which emulate the Motorola RTC chip faith- fully. However, some motherboards incorrectly emulated the chip and this causes hiccups in the time adjustments performed by OS2_NTPD on occasion. For- tunately, since the advent of the Pentium based motherboards with predominantly Intel chipsets, this problem is not as widespread and is probably limited only to older 486 systems. I have never seen a Pentium machine with an incorrectly implemented RTC. The difference is in how the chips behave after divisor reset, the method of timestepping used by OS2_NTPD. Truly compatible implementations update the next second 500 ms after divisor reset. The other implementations I have seen update it immediately following divisor reset. This causes problems when a small, single tick correction is being made and the actual time that it is performed slips by a tick due to pre-emption, etc. This slip causes a whole second error to occur instead of one tick. I have not successfully eliminated these occurrences yet, however they are rare. They seem to be worst on heavily loaded systems and systems running dial-up serial modems using PPP, which runs at a very high priority. Following the initial execution of OS2_NTPD, the data file rtc_type will hold the results of its check for the type of RTC chip in your system. If the value stored in rtc_type is zero, then your RTC is 100% compatible and you should have no problems such as I have described. If the value is 500, then you should expect to experience the one second hiccups from time to time if your system is underpowered or heavily loaded or are accessing the Internet via dial- up modem. IV. Operation OS2_NTPD is a typical OS/2 text mode (VIO) application and can be executed in one of two ways: 1) From the command line using a single server, with these arguments as so: os2_ntpd.exe [ntp server(name or dotted decimal) initial polling interval (integer seconds) number of requests to send (integer)] where: "ntp server" is the IP address of the NTP server (i.e. tick.usno.navy.mil or 206.54.0.21). "initial polling interval" is the number of seconds between requests to the server. It should be a power of two, such as 2, 4, 8, 16 etc. "number of requests to send" is how many times to request time from the server, if 0 is entered then requests will be sent indefinitely. All of these arguments must be separated by spaces. The first argument is required. The initial polling interval defaults to omitted. The number of requests defaults to 1 if omitted. 2) From the command line with no arguments. When executed this way, OS2_NTPD looks for the data file cfg_data in the current directory. If it is not found, OS2_NTPD will display an error message and terminate. If the cfg_data file exists and is correctly formatted, then OS2_NTPD will display the contents of the file in the window and begin normal operation. A typical cfg_data file might contain: cfg_data poll interval = 16 tick.usno.navy.mil tock.usno.navy.mil time.nist.gov 206.54.0.21 Each line must be terminated by a CR and LF. The cfg_data and poll internal lines are required and must appear in the order shown. Up to 22 NTP servers may be listed following the poll_interval line. Of course, a Workplace Shell program object may be created allowing execution via mouse clicks, and a copy of the program object could be dragged to the Startup Folder to allow automatic invocation following each boot up. It is also possible to run OS2_NTPD detached. When run detached, status will be written to the standard output. This output will be discarded unless the standard output is redirected when os2_ntpd is started. When running detached, the -l command line option is available to increase the verbosity of the status output. The default verbosity reports errors and reports the current poll interval every six hours. With the -l option, the status output will report every clock update. This will result in a large log file and is primarily a debugging tool. To run OS2_NTPD detached, you can use a command line like: detach OS2_NTPD >%LOGFILES%\os2_ntpd.log V. The OS2_NTPD User Interface After reading the cfg_data file and displaying the server list, the program will initialize the user interface screen. This screen is a standard 25 line by 80 character text mode window, divided into three regions. The top region consists of thirteen lines which display decoded packets, the list of NTP servers and other data that can be requested. The next region consists of three lines displaying output status information such as timeouts, reply packets which are indicating an alarm state, ensemble statistics, etc. The bottom five lines display the 12 item user menu, not all of which are in use at this time. Menu items can be selected by function key number or by alphabetic hotkey. The hotkey letters are highlighted in the menu text. The hotkeys are useful when OS2_NTPD is run via VNC or telnet and the function keys are not well supported. The current set of available menu items and the assoicated function keys are: F1 Show Next Pkt -- Pressing this key will display the decoded packet received from the first server from which a reply was received in the current polling interval. Pressing it again will display the next one and so on. Underneath the raw packet information are displayed the server specific timing statistics: the current server - client offset measurement in seconds, the standard deviation of those measurements, and the maximum and minimum measurements. F2 Show Prev Pkt -- Pressing this key will display the decoded packet received from the last server from which a reply was received in the current polling interval. Pressing it again will display the previous one and so on. F6 Quick Sync -- Pressing this key will enable an instantaneous "jam sync" of the system clock based on the next ensemble of replies received from the active servers. The default behavior if this key is not pressed is to propagate the ensembled replies through a phase locked loop filter which will slowly bring the system clock in line with the NTP servers. The Quick Sync function is similar to NTPDATE in that it is used to establish a starting synchronization which is then refined based on further averaging of NTP server replies and gradual corrections. F7 Show Peers -- Pressing this key will display a list of the peers which were active during the current polling interval. F10 Enable Debug -- Pressing this key will enable logging of suspect reply packets to the file "suspects". This log file will be opened for appending and closed after each polling interval. Pressing the key again will suspend logging to this file. F11 Open LogFile -- Pressing this key the first time will open a log file that is named with the current ntp second. This log file will be opened for appending and closed after each polling interval and contains the reduced timing data from each of the servers in the cfg_data file, as well as ensemble statistics. Once the log file is open, pressing the key again will close the file permanently. F12 About -- Pressing this key will display information about this program. VI. Theory of Operation Interested users should consider downloading the RFCs relating to network timing written by David Mills of the University of Delaware. These cover in gory detail the inner workings of the NTP. Mills also maintains a website, http: //www.eecis.udel.edu/~ntp/ which is a vast repository of NTP related lore and entertainment. OS2_NTPD operates based on version 3.0 of the NTP as described in RFC 1305. Here I will only mention that the cornerstone of the NTP is server diversity. The benefits of statistical ensembling and clustering are not available if only one server is being polled. OS2_NTPD allows up to 22 servers to be configured for this reason. OS2_NTPD maintains stability measurements on each server being used to set the client clock. These stability measures are used to calculate weighting of the individual server's contribution to the overall ensemble. Noisy servers receive less weighting, quiet ones more. Further, due to the ordering of the procedures, when a measurement comes in from a server, its weight is updated first, then the measurement is added into the ensemble based on the new weight. This provides a measure of immunity from bad server replies since they are de-weighted prior to being used. Once an ensemble measurement has been synthesized, it is passed to the phase locked loop which controls the system clock. The phase locked loop implements averaging of the NTP server reply data across time as opposed to the ensembling algorithm which implements averaging across multiple servers. Initially the PLL operates fairly quickly and updates the RTC at the rate specified by the initial polling interval parameter provided in the cfg_data file or from the command line. Once the client clock has been pulled within a tick (31.25 ms) then the polling interval is lengthened by a factor of two. Each time the ensemble measurement is within a tick, the polling interval is again lengthened until it reaches 256 seconds, beyond which it does not extend. After the polling interval has reached 256 seconds, PLL averaging is further extended by modifying the coefficients in the digital loop filter. These are allowed to extend until the PLL equivalent averaging time has reached 13401 seconds. The main reason for setting the averaging time so long is to allow an accurate measurement of the frequency offset of the client clock timebase. This frequency offset has been referred to as "skew" in the Mills literature. Unfortunately, the file created by the Unix versions of NTP containing this skew term is called NTPDRIFT. Drift has actually been defined by the global time and frequency community to mean the change in frequency of an oscillator as a function of time, not its change in phase. So as not to confuse those who have dealt with the various ports of Mills' NTP client daemons, I have retained the " drift" naming convention for the file which holds the fractional frequency offset of the client clock timebase. OS2_NTPD uses this "drift" to extrapolate the behavior of the client clock when no servers are available, so that corrections may continue to be made to the clock to compensate for its assumed constant frequency error. In addition, after a power outage, OS2_NTPD checks the timestamp in the "drift" file to determine the length of the outage and will apply a correction based on the outage duration and the fractional frequency offset which was stored in the "drift" file. This approach is not fool proof, since corrections made manually or by other programs during the outage of OS2_NTPD operation will not be known to OS2_NTPD. Also, the frequency of the crystal oscillator inside of the PC will be different when the power is applied as compared to when it is not since the temperature inside the PC is dependent upon this. VII. Current Known Deficiencies in this version of the OS2_NTPD Client NTP: 1) The Leap Indicator bits are currently used only to detect server alarm condition. No attempt is made to transparently implement any leap second event at the correct time. This may be fixed in the future when more servers properly indicate leap second events in these bits, which is not the case now! 2) The movement of time from Standard to Daylight and vice versa currently propagates through the PLL loop filter and so takes a slow journey--maybe an hour or so to get there. Will fix this eventually, but recommend that you do not run your workstations on anything but Standard time, be it local or UTC. 2) No preference is currently given to servers based on their operating NTP stratum level or root dispersion. VIII. Version History Changes in version 1.4 of OS2_NTPD - Write logs file to LOGFILES if defined - Add support for running detached. - Optimize code paths. - Add more error logic. - Add fix to suppress DST changeover oscillation. - Ensure running codepage 437. Changes in version 1.3 of OS2_NTPD - Port to OpenWatcom. - Add support for menu hotkeys. Bugfixes included in version 1.2 of OS2_NTPD This was Bruce Penrod's final release. 1) This version fixes the problems which were introduced when IBM changed the tick rate of the RTC from 32 Hz to 128 Hz. The program now detects the rate at which the RTC has been set to generate an interrupt and operates ap- propriately for either case. One would think that the new higher rate would allow an improvement in the setting of the clock, however the opposite is the case. With the introduction of the higher tick rate, timetagging resolution has been improved, so that calls to ftime() now return a precision of 10 ms. Unfortunately, the other half of the problem, the ability to have something done at a certain time using a timer function like DosSleep(), has not been improved to the 10 ms level. The net effect is that there is more uncertainty now in the setting of the RTC chip, so that typical performance is still at the 30 ms level. Bugfixes included in version 1.1 of OS2_NTPD: 1) Some versions of OS/2 Warp Connect with various FixPacks at about 17 were unable to run version 1.0 of the program, aborting with a "Stack Overflow" message immediately following start-up. I changed the compiler from Borland 1.5 to IBM VAC++ 3.0, increased the stacksize in the threads and rearranged the operation of the threads to eliminate the possibility of clean-up not being performed. These systems are now able to run the program but there are still some questions concerning memory leakage and system lock-ups on those same systems. I will be welcoming any feedback as to whether I have fixed those problems! 2) Borland did not do a very good job on the TZ environment variable in their tzset() routine, choosing to have it handle only North American time zone changes properly. Since changing to the IBM compiler for this version, OS2_NTPD fully supports the TZ environment variable as described in this manual so that both standard time and daylight time may work anywhere in the world if the TZ variable is set up properly. 3) The REF ID field of the NTP packet was not being decoded properly with servers operating at Stratum 2 or higher in version 1.0 of OS2_NTPD. It should have shown the IP address of the server to which that server is peered rather than the ascii clock type code like GPS or ACTS as would be done for Stratum 1 servers. 4) Some users with non-compatible RTC implementations have experienced the one second hiccups in the RTC correction process that is described in this manual. In version 1.1, I have managed to reduce them to an acceptable level on my machines by giving up some of the resolution of the correction. What this amounts to is that when I detect the RTC type, if it is a non- compatible one, I perform two tick clock adjustments instead of single tick adjustments. Due to the subtleties of the adjustment process, this still allows me to maintain an accuracy of about one tick, or 31.25 ms but greatly reduces the frequency of the hiccups. 5) Fixed a potential string overflow problem when extremely large offsets between the local clock and a server were being displayed. DISCLAIMER!!! The author makes no claims concerning suitability of this program for any use. OS2_NTPD is offered for your use "as is", with no expressed or implied warranties or guarantees of any kind. The author will assume no liability for damages either from the direct use of this product or as a consequence of the use of this product.
 hobbes.nmsu.edu/download/pub/os2/apps/clock/os2_ntpd-1.4-full-shl-2015-01-20.zip  local copy
Scheda aggiornata l'ultima volta il: 12/07/2023 - 05:33

Commenti

New LInk: https://hobbes.nmsu.edu/download/pub/os2/util/time/NTP_4-2-0b6.zip

Aggiungi un commento