Data rilascio: 
Martedì, 12 Settembre, 1995



GAMESRVR è una libreria per il supporto a pieno schermo di applicazioni ludiche che fanno uso di DIVE.

Questo software è distribuito come pacchetto compresso, da scaricare e installare manualmente; se ci sono prerequisiti da soddisfare, andranno anch'essi scaricati e installati manualmente.

Installazione manuale

Il programma è distribuito come pacchetto ZIP: scaricare in una cartella temporanea e scompattare nella cartella di destinazione. Vedi sotto per il(i) link di download.

Qui di seguito trovi i link di download per l'installazione manuale del software:

GAMESRVR (12/9/1995, International Business Machines Corporation (IBM)) Readme/What's new
GAMESRVR.DLL -- Full-screen support for DIVE game applications Overview: --------- The purpose of the GameSrvr is to support games in video modes other than that used by the OS/2 desktop. The reason for this is quite simple: SPEED. Most games on the market today use the 320x200x256 VGA mode. There are a number of reasons for using this mode that outweigh the mediocre resolution of 320 by 200 pels in 256 colors. Compatibility: This mode exists on all VGA and SuperVGA cards. Ease of Use: This mode uses a flat frame buffer and exactly one byte per pel. This greatly simplifies the coding of graphics routines, since hardware registers and bit packing can be ignored. Speed: Not only are the graphics algorithms faster due to their simplicity, but the buffer is only 64000 bytes. Compare this to a typical desktop resolution of 1024x768x256 with a frame buffer of 786432 bytes, more than 12 times larger and slower. If the resolution or number of colors is increased, this will only get worse. By using the functions provided by the GameSrvr, PM programs can be written to use the full screen without paying the penalty of a large frame buffer. Installation and Use: --------------------- To install the GameSrvr, run GSRVINST.EXE to perform the following steps: Copy GAMESRVR.DLL and DIVE.DLL to d:\OS2\DLL, where d is the boot drive. Add the GAMESRVR key to the PM_ED_HOOKS application in OS2.INI with the key value of d:\OS2\DLL\GAMESRVR.DLL, where d is the boot drive. If SVGADATA.PMI exists in the d:\OS2 directory, copy SVGA.EXE to d:\OS2, then execute SVGA ON INIT to rebuild the SVGADATA.PMI file, adding the 320x200x256 mode. Depending on the video card that you have installed, the installation may end in the full-screen DOS session where SVGA.EXE was executed. If so, you should type EXIT to return to your OS/2 session. The system will have to be rebooted to allow these changes to take effect. Applications written to use the GameSrvr will automatically take advantage of its presence. Once an application has initialized with GameSrvr, the user can switch to full screen mode by hitting "ALT + HOME" ( Only the home key on the key pad will work ). This mechanism is supported by GameSrvr directly. An application can also provide a user interface that takes advantage of GameSrvr APIs to switch to full screen mode. Programming: ------------ The GameSrvr is loaded at execution time by performing a DosLoadModule on GAMESRVR. If this is successful, the address of the InitGameFrameProc routine my be queried using DosQueryProcAddr. When you call this routine with the handle of the frame window of the application, it subclasses the frame window procedure. This allows the GameSrvr to process all messages sent to the application, especially focus change messages which may require restoration of the original desktop mode. Communication with the GameSrvr is through the following three messages: WM_SetVideoMode (0x04A0) This message uses mp1 to select either one of the preset game window styles or a specific video mode, as extracted from the table of supported video modes. mp1 == 0 restores the original mode of the desktop, as well as the original size and location of the application's window. mp1 == 1 restores the original mode of the desktop, but expands the size of the client window so that only the client window and the command bar are visible. mp1 == 2 expands the client window to fill the screen, then sets the video mode to the standard 320x200x256 game mode. mp1 > 2 expands the client window to fill the screen, then sets the video mode defined by the VIDEOMODEINFO structure addressed by mp1. The return value from this message is 1, if successful, otherwise 0. WM_NotifyVideoModeChange (0x04A1) This message is generated by the GameSrvr to notify the application immediately before and again immediately after a video mode change. mp1 == 0 indicates that the video mode is about to change. mp1 == 1 indicates that the video mode change is complete. In both cases, mp2 contains the address of the VIDEOMODEINFO structure which describes the video mode or 0 or 1, as described for the WM_SetVideoMode message. The value of 2 will never be returned. Instead it is transformed into a pointer to a VIDEOMODEINFO structure. The return value of this message is ignored. WM_GetVideoModeTable (0x04A2) This message is used only if you wish to select a video mode other than the standard 320x200x256 mode. mp1 is the address of a PVOID to receive the address of an array of VIDEOMODEINFO structures describing all of the modes supported by the current display card. This array is allocated for you. You may delete it yourself or allow it to be automatically deleted at process termination. mp2 is the address of a ULONG to receive the number of structures in the array that was allocated. The return value from this message is 1, if successful, otherwise 0.  local copy
Scheda aggiornata l'ultima volta il: 02/09/2023 - 10:55


New Link:

Aggiungi un commento