CanoScan 4400F for OS/2 (and eComStation)

┌─────────────────────────┐ ┌──────────────┐ │ CanoScan 4400F for OS/2 ├────────────────────────────────────┤ 4400Fv01.ZIP │ └─────────────────────────┘ └──────────────┘ Scan paper, photo, slide and film in color, greyscale and bitonal with the CanoScan 4400F scanner attached to an OS/2 (or eComStation) system. Supports 100, 150, 200, 300, 400, 600, 800 and 1200 spi. Made in Holland by Wim Brul. This version replaces 4400Fv00.ZIP and corrects USB 2.0 Hi-Speed operation. Consists of SCAN.TXT (this text file), USBECD.SYS (the device driver) and SCAN.EXE (the scanner program). May be freely used and exchanged, as long as it is not modified. You may use this product solely at your own risk. I cannot be held responsible for any damages occurring due to your using this product. You may not lease, rent or sell this product to any other party. Have fun. ┌──────────────┐ │ Installation ├─────────────────────────────────────────────────────────────── └──────────────┘ Move the 4400Fv01.ZIP file into a directory of your choice and unzip it. Copy the USBECD.SYS file to your C:\OS2\BOOT directory. Add this device driver to your CONFIG.SYS file with the DEVICE=C:\OS2\BOOT\USBECD.SYS /D:04A9:2228:0500 /N:CNS$ /V statement and restart your system. ┌────────────────────────┐ │ Operating Instructions ├───────────────────────────────────────────────────── └────────────────────────┘ Attach the CanoScan 4400F and wait for the beep. Put the object to be scanned in the scanner and close the cover. Start the SCAN.EXE program with the proper parameters. The file SCAN.TIF is written to the current work directory. Enhanced scanning may be done in 2 steps for color and greyscale images. The 1st scan without the /e parameter performs a scan with gamma 1.0 tables. The 2nd scan with the /e parameter performs a scan with gamma 2.0 tables. These tables are used in the 2nd scan but are loaded in the 1st scan. ┌────────────┐ │ Paper Scan ├───────────────────────────────────────────────────────────────── └────────────┘ Attach the CanoScan 4400F and wait for the beep. Put the paper on the flatbed and close the cover. Start the SCAN.EXE program with the proper parameters. The file SCAN.TIF is written to the current work directory. ┌────────────────┬──────────────────────────┬──────────────────────┐ │ objective │ command │ equivalent │ ├────────────────┼──────────────────────────┼──────────────────────┤ │ scan A4 format │ scan.exe /h297mm /w210mm │ /h1168 /w824 /x2 /y2 │ │ scan A5 format │ scan.exe /h210mm /w149mm │ /h0824 /w584 /x2 /y2 │ │ scan A6 format │ scan.exe /h149mm /w105mm │ /h0584 /w412 /x2 /y2 │ │ scan A7 format │ scan.exe /h105mm /w075mm │ /h0412 /w292 /x2 /y2 │ └────────────────┴──────────────────────────┴──────────────────────┘ Use /m for greyscale. Use /b for bitonal. ┌────────────┐ │ Photo Scan ├───────────────────────────────────────────────────────────────── └────────────┘ Attach the CanoScan 4400F and wait for the beep. Put the photo on the flatbed and close the cover. Start the SCAN.EXE program with the proper parameters. The file SCAN.TIF is written to the current work directory. ┌───────────────┬────────────────────────┬─────────────────────┐ │ objective │ command │ equivalent │ ├───────────────┼────────────────────────┼─────────────────────┤ │ scan 18x13 cm │ scan.exe /h18cm /w13cm │ /h708 /w508 /x2 /y2 │ │ scan 17x11 cm │ scan.exe /h17cm /w11cm │ /h668 /w432 /x2 /y2 │ │ scan 15x10 cm │ scan.exe /h15cm /w10cm │ /h588 /w392 /x2 /y2 │ │ scan 13x09 cm │ scan.exe /h13cm /w09cm │ /h508 /w352 /x2 /y2 │ └───────────────┴────────────────────────┴─────────────────────┘ Use /m for greyscale. ┌────────────┐ │ Slide Scan ├───────────────────────────────────────────────────────────────── └────────────┘ Attach the CanoScan 4400F and wait for the beep. Put the slides into the holder and close the cover. Start the SCAN.EXE program with the proper parameters. The file SCAN.TIF is written to the current work directory. ┌────────────────┬──────────────┬───────────────────────────┐ │ objective │ command │ equivalent │ ├────────────────┼──────────────┼───────────────────────────┤ │ scan 1st slide │ scan.exe /s1 │ /s /h132 /w88 /x388 /y186 │ │ scan 2nd slide │ scan.exe /s2 │ /s /h132 /w88 /x388 /y406 │ │ scan 3rd slide │ scan.exe /s3 │ /s /h132 /w88 /x388 /y626 │ │ scan 4th slide │ scan.exe /s4 │ /s /h132 /w88 /x388 /y846 │ └────────────────┴──────────────┴───────────────────────────┘ Use /m for greyscale. ┌───────────┐ │ Film Scan ├────────────────────────────────────────────────────────────────── └───────────┘ Attach the CanoScan 4400F and wait for the beep. Put the film into the holder and close the cover. Start the SCAN.EXE program with the proper parameters. The file SCAN.TIF is written to the current work directory. ┌────────────────┬──────────────┬───────────────────────────┐ │ objective │ command │ equivalent │ ├────────────────┼──────────────┼───────────────────────────┤ │ scan 1st frame │ scan.exe /f1 │ /f /h132 /w88 /x388 /y128 │ │ scan 2nd frame │ scan.exe /f2 │ /f /h132 /w88 /x388 /y278 │ │ scan 3rd frame │ scan.exe /f3 │ /f /h132 /w88 /x388 /y428 │ │ scan 4th frame │ scan.exe /f4 │ /f /h132 /w88 /x388 /y578 │ │ scan 5th frame │ scan.exe /f4 │ /f /h132 /w88 /x388 /y728 │ │ scan 6th frame │ scan.exe /f4 │ /f /h132 /w88 /x388 /y878 │ └────────────────┴──────────────┴───────────────────────────┘ Use /m for greyscale. Use /n for negatives. ┌────────────────────┐ │ Program Parameters ├───────────────────────────────────────────────────────── └────────────────────┘ /dN - Scanning resolution in samples per inch. Valid values for N are 100, 150, 200, 300, 400, 600, 800 and 1200. /b or /bb or /bg or /br - Bitonal with a fixed threshold of 127. Defaults to green sensor. Select blue, green or red sensor. /m or /mb or /mg or /mr - Greyscale. Defaults to weighted average of red, green and blue sensors. Select blue, green or red sensor. /hN or /hNcm or /hNmm - Height of the scan area in cin, cm or mm. Valid values for N are 16 to 1180 cin and must be divisible by 4. /wN or /wNcm or /wNmm - Width of the scan area in cin, cm or mm. Valid values for N are 16 to 864 cin and must be divisible by 4. /xN or /xNcm or /xNmm - Horizontal start position of the scan area in cin, cm or mm. Valid values for N are 0 to 848 cin. /yN or /yNcm or /yNmm - Vertical start position of the scan area in cin, cm or mm. Valid values for N are 0 to 1164 cin.