Pen and Touch for Thinkpad Yoga12

Version: 
0.1
Release date: 
Saturday, 11 January, 2020

License:

Interface:

Authors/Port authors:

This program let you use pen or touch on Thinkpad Yoga12 laptops running ArcaOS.

This software is distributed as compressed package. You have to download and manually install it; if prerequisites are required, you will have to manually install them too.

Manual installation

Program is distributed as ZIP package: download to temporary directory and unpack to destination folder. See below for download link(s).

Following ones are the download links for manual installation:

Pen and Touch for Thinkpad Yoga12 v. 0.1 (Source code, 11/1/2020, Wim Brul) Readme/What's new
┌───────────────────────────────────────────────┐ ┌───────────────┐ │ Pen and Touch for Thinkpad Yoga12 with ArcaOS ├─────────────┤ Yoga12v01.zip │ └───────────────────────────────────────────────┘ └───────────────┘ Use your finger and pen with ArcaOS installed on a Thinkpad Yoga12. Made in Holland by Wim Brul. Thanks to Sigurd Fastenrath for requirements and testing. Open Source product with its ISC license contained in the LICENSE file. Source Code at http://home.hccnet.nl/w.m.brul/Yoga12/Yoga12v01s.zip ┌───────────────────────────┐ │ Installation Instructions ├────────────────────────────────────────────────── └───────────────────────────┘ Move Yoga12v01.zip into a directory of choice and unzip it. Copy Yoga12.exe to your C:\OS2\BOOT directory. The Emulate Mouse Driver for OS/2 (ArcaOS, eComStation) is required. Obtain this product from http://home.hccnet.nl/w.m.brul/emumouse/xsmouse10.zip Move XSMOUSE10.ZIP into a directory of choice and unzip it. Copy XSMOUSE.SYS to your C:\OS2\BOOT directory. The USB 2.0 Extended Control Driver for OS/2 (ArcaOS, eComStation) is required. Obtain this product from http://home.hccnet.nl/w.m.brul/usbprobe/usbecd23.zip Move USBECD23.ZIP into a directory of choice and unzip it. Copy USBECD.SYS to your C:\OS2\BOOT directory. Look into your CONFIG.SYS file to determine which mouse device driver has been installed on your system. You may find AMOUSE.SYS or MOUSE.SYS and you need to add the STYPE=XSMOUSE$ parameter to that device driver statement and to insert the DEVICE=C:\OS2\BOOT\XSMOUSE.SYS device driver statement just above it. Insert also the $FINGER$ and $STYLUS$ device driver statements and the RUN=C:\OS2\BOOT\YOGA12.EXE statement as shown below: DEVICE=C:\OS2\BOOT\XSMOUSE.SYS DEVICE=C:\OS2\BOOT\AMOUSE.SYS STYPE=XSMOUSE$ DEVICE=C:\OS2\BOOT\USBECD.SYS /D:06CB:7244:0005 /N:$FINGER$ /S /V DEVICE=C:\OS2\BOOT\USBECD.SYS /D:056A:00EC:0135 /N:$STYLUS$ /S /V RUN=C:\OS2\BOOT\YOGA12.EXE Restart your system and the fun begins. ┌───────────────────┐ │ Special Parameter ├────────────────────────────────────────────────────────── └───────────────────┘ C:\OS2\BOOT\YOGA12.EXE /v CAUTION: This parameter may only be used when invoked from a command prompt. /v - verbose. Specify this parameter to get debug output on stdout.
 home.hccnet.nl/w.m.brul/Yoga12/Yoga12v01s.zip
Pen and Touch for Thinkpad Yoga12 v. 0.1 (11/1/2020, Wim Brul) Readme/What's new
┌───────────────────────────────────────────────┐ ┌───────────────┐ │ Pen and Touch for Thinkpad Yoga12 with ArcaOS ├─────────────┤ Yoga12v01.zip │ └───────────────────────────────────────────────┘ └───────────────┘ Use your finger and pen with ArcaOS installed on a Thinkpad Yoga12. Made in Holland by Wim Brul. Thanks to Sigurd Fastenrath for requirements and testing. Open Source product with its ISC license contained in the LICENSE file. Source Code at http://home.hccnet.nl/w.m.brul/Yoga12/Yoga12v01s.zip ┌───────────────────────────┐ │ Installation Instructions ├────────────────────────────────────────────────── └───────────────────────────┘ Move Yoga12v01.zip into a directory of choice and unzip it. Copy Yoga12.exe to your C:\OS2\BOOT directory. The Emulate Mouse Driver for OS/2 (ArcaOS, eComStation) is required. Obtain this product from http://home.hccnet.nl/w.m.brul/emumouse/xsmouse10.zip Move XSMOUSE10.ZIP into a directory of choice and unzip it. Copy XSMOUSE.SYS to your C:\OS2\BOOT directory. The USB 2.0 Extended Control Driver for OS/2 (ArcaOS, eComStation) is required. Obtain this product from http://home.hccnet.nl/w.m.brul/usbprobe/usbecd23.zip Move USBECD23.ZIP into a directory of choice and unzip it. Copy USBECD.SYS to your C:\OS2\BOOT directory. Look into your CONFIG.SYS file to determine which mouse device driver has been installed on your system. You may find AMOUSE.SYS or MOUSE.SYS and you need to add the STYPE=XSMOUSE$ parameter to that device driver statement and to insert the DEVICE=C:\OS2\BOOT\XSMOUSE.SYS device driver statement just above it. Insert also the $FINGER$ and $STYLUS$ device driver statements and the RUN=C:\OS2\BOOT\YOGA12.EXE statement as shown below: DEVICE=C:\OS2\BOOT\XSMOUSE.SYS DEVICE=C:\OS2\BOOT\AMOUSE.SYS STYPE=XSMOUSE$ DEVICE=C:\OS2\BOOT\USBECD.SYS /D:06CB:7244:0005 /N:$FINGER$ /S /V DEVICE=C:\OS2\BOOT\USBECD.SYS /D:056A:00EC:0135 /N:$STYLUS$ /S /V RUN=C:\OS2\BOOT\YOGA12.EXE Restart your system and the fun begins. ┌───────────────────┐ │ Special Parameter ├────────────────────────────────────────────────────────── └───────────────────┘ C:\OS2\BOOT\YOGA12.EXE /v CAUTION: This parameter may only be used when invoked from a command prompt. /v - verbose. Specify this parameter to get debug output on stdout.
 home.hccnet.nl/w.m.brul/Yoga12/Yoga12v01.zip
Record updated last time on: 16/03/2020 - 20:57

Translate to...

Add new comment