Messaggio di errore

Il commento a cui hai risposto non esiste.

Extended Desktop

Versione: 
1.4
Data rilascio: 
Mercoledì, 23 Giugno, 1993

Licenza:

Interfaccia:

EXTDESK è una libreria dinamica per la WPS che contiene la classe oggetto "ExtendedDesktop", che è una sottoclasse della classe oggetto "WPDesktop". Il suo scopo è quello di estendere le funzioni dell'oggetto Desktop di OS/2 2.x.

Extended Desktop estende il Desktop della WPS di OS/2 2.x:

  1. Rimuove la funzione "Arrange & Sort" dal menu contestuale del Desktop.
  2. Allinea verticalmente od orizzontalmente gruppi di icone sul Desktop.
  3. Allinea gli oggetti del Desktop alla griglia con una spaziatura definibile dall'utente.
  4. Posizionamento di icone individuali sul Desktop attivabile dal Notebook delle impostazioni.
  5. Posizionamento di icone individuali sul Desktop da linguaggio C o REXX.
Questo software è distribuito come pacchetto compresso, da scaricare e installare manualmente; se ci sono prerequisiti da soddisfare, andranno anch'essi scaricati e installati manualmente.

Installazione manuale

Il programma è distribuito come pacchetto ZIP: scaricare in una cartella temporanea e scompattare nella cartella di destinazione. Vedi sotto per il(i) link di download.

Qui di seguito trovi i link di download per l'installazione manuale del software:

Extended Desktop v. 1.4 (23/6/1993) Readme/What's new
(c) Copyright IBM Corporation 1993. All Rights Reserved. Extended Desktop by Dan Campbell REQUIREMENTS ------------ 1) OS/2 2.0 2) Service Pack -- This is the absolute minimum! Make sure that "Always maintain sort order" is not checked on the Sort Page of the Desktop Settings notebook, before you install. INSTALLATION ------------ 1) If you have a previous level of Extended Desktop installed, See "UPGRADE" below or follow REMOVAL instructions below. 2) Copy EXTDESK.DLL to a directory that is listed in your LIBPATH in CONFIG.SYS 3) Run EXTINST.EXE 4) Shutdown and reboot. REMOVAL ------- 1) Run EXTREMOV.EXE 2) Shutdown and reboot. 3) Erase EXTDESK.DLL if you wish. UPGRADE ------- It is possible to update the DLL without going through the full process of REMOVAL followed by another INSTALLATION. A simple addition to CONFIG.SYS will cause EXTDESK.DLL to be updated automatically the next time you boot. To replace EXTDESK.DLL with a new version on the next boot, add the following line anywhere in CONFIG.SYS ( I put it at the top ): CALL=x:\OS2\XCOPY.EXE srcpath\EXTDESK.DLL destpath where "x" is the boot drive on your system, "srcpath" is the full path of the directory where you download new versions of EXTDESK, and "destpath" is the full path where you put the working copy of EXTDESK.DLL. "srcpath" should be a directory that does NOT appear in your LIBPATH. "destpath" must be a directory that DOES appear in your LIBPATH. For example, I put new copies of EXTDESK.DLL in the EXTDESK directory on my E: drive, and put the working copy in the C:\OS2\DLL directory. The line in my CONFIG.SYS is: CALL=C:\OS2\XCOPY.EXE E:\EXTDESK\EXTDESK.DLL C:\OS2\DLL\ WHAT DOES IT DO? ---------------- EXTINST registers the ExtendedDesktop Class, then uses a public API in OS/2 to "replace" the WPDesktop class with the ExtendedDesktop class. Any objects of the WPDesktop class will exhibit the behavior of the ExtendedDesktop class. A reboot is required for it to take effect. I do NOT modify CONFIG.SYS. Everything about your current setup ( settings, icon positions, etc ) remains untouched. The only changes you will see are: 1) Sort and Arrange will be absent from the Desktop context menu, 2) an Align item and a Snap-to-Grid item will be added to the Desktop context menu, 3) 2 Arrange settings pages will be in the Desktop Settings notebook, 4) an Icons settings page will be added to the Desktop Settings notebook, and 5) The Sort settings page will be absent from the Desktop Settings notebook. THE ARRANGE SETTINGS PAGE 1 OF 2 -------------------------------- The Arrange settings page allows you to choose how you wish to be protected from accidental arrange. You have two choices: 1) Arrange and Sort will be removed from the Desktop context menu (and the Sort Page will be removed from the Desktop Settings notebook), or 2) Selecting Arrange or Sort from the Desktop context menu will cause a confirmation dialog to popup. The "Arrange Minimized Windows" check box allows you to choose whether to allow Arrange for Windows that are minimized to the Desktop. The default is No. If this box is checked, an "Arrange Minimized" context menu item will be added to the Desktop context menu. The "Snap to Grid" check box allows you to choose whether the menu item labeled "Snap to Grid" will appear on the Desktop context menu. THE ARRANGE SETTINGS PAGE 2 OF 2 -------------------------------- The "Deselect after Align" checkbox allows you to choose whether the selected items will remain selected after an Align operation. If it is checked, all selected items will be deselected after the Align operation. The default is for them to remain selected. The "Even Spacing on Align" check box allows you to choose whether Icons will be spaced evenly when aligned. If this box is checked, selected icons will be evenly spaced between the two icons on the ends of the selected group. Note that this may move icons such that they no longer conform to the grid. Page 2 of the Arrange Settings also has two spin buttons for setting the Grid Spacing for the "Snap to Grid" function. THE "Snap to Grid" MENU ITEM ON THE DESKTOP CONTEXT MENU -------------------------------------------------------- This menu item only appears if the "Snap to Grid" checkbox is checked on Arrange Settings Page 1. Selecting this menu item causes objects on the Desktop to be moved so that their x- and y-coordinates are multiples of the values set on Arrange Settings Page 2. Objects will not be moved if they already conform to the grid spacing. If moving an object would place it at the same (x,y) location as another object, the second object will be moved one grid spacing to the right. THE "Arrange Minimized" MENU ITEM ON THE DESKTOP CONTEXT MENU ------------------------------------------------------------- This menu item only appears if the "Arrange Minimized Windows" box is checked on Arrange Settings Page 1. Selecting this menu item causes Windows that are minimized to the Desktop to be rearranged just as they would be without ExtendedDesktop installed. THE ALIGN CASCADE MENU ON THE DESKTOP CONTEXT MENU -------------------------------------------------- This item on the Desktop context menu allows you to align a group of objects on the Desktop either vertically or horizontally. To use this, first select a group of objects on the Desktop in one of the following three ways: 1) a. Move the mouse pointer to the first object you want to select. b. Press and hold mouse button 1; then move the pointer over the objects to be selected. c. Release the mouse button. NOTE: Objects will be aligned with object that was selected last. Or: 2) a. Move the mouse pointer to the first object you want to select. b. Press and hold the Ctrl key. c. While holding the Ctrl key, click mouse button 1 on each object to be selected. NOTE: Objects will be aligned with object that was selected last. Or: 3) a. Click mouse button 1 on the object with which you want other objects to be aligned. b. Move the mouse pointer to just outside the objects you want to select. c. Press and hold mouse button 1; then move the pointer to draw a box arround the objects to be selected ( including the object selected in step a). d. Release the mouse button. NOTE: Objects will be aligned with object that was selected in step a. If you wish to align the icons vertically, select "Vertically" from the Align cascade on the Desktop context menu. If you wish to align the icons horizontally, select "Horizontally" from the Align cascade on the Desktop context menu. Aligning vertically changes the x-coordinate of all selected objects to be the same. The y-coordinates will not change. Aligning horizontally changes the y-coordinate of all selected objects to be the same. The x-coordinates will not change. Therefore, it is possible to position objects on top of each other, if you're not careful. THE ICONS SETTINGS PAGE ----------------------- The Icons settings page allows you to precisely position any icon on the Desktop. On this page, the title text of each object on the Desktop appears in a listbox. When you select an item in the listbox, the corresponding object on the Desktop will be hilighted. Also, its x- and y-coordinates will appear in the two spin buttons below the listbox. You can then position the object on the Desktop by changing the values in the spin buttons. Selecting an Icon on the Desktop will cause the corresponding item in the listbox to be selected. POSITIONING AN ICON FROM REXX OR C ---------------------------------- It is possible to position an individual icon from a REXX or C program. This is done using SysSetObjectData from REXX, or WinSetObjectData from C. The data is a character string of the following form: "MOVEICON=title;X=n;Y=m;" where "title" is the Icon's title text, "n" is the desired x-coordinate, and "m" is the desired y-coordinate. The title only needs to be long enough to uniquely identify the object ( e.g., specifying "Shred" would move the Shredder, as long as there wasn't anothere object title beginning with "Shred" ). The title may contain spaces, however, the case must be exact. If the title contains line breaks, place a caret in the title at the point of the line break ( e.g. if the Master Index title text contains line break, the string would be "MOVEICON=Master^Index;X=100;Y=100;" ). From REXX, an Object on the Desktop may be positioned using the SysSetObjectData REXX Utility Function. A sample REXX program that moves the Shredder to x=200, y=300 would look like this: /* move the Shredder */ call RxFuncAdd 'SysLoadFuncs','RexxUtil','SysLoadFuncs' call SysLoadFuncs call SysSetObjectData "<WP_DESKTOP>","MOVEICON=Shredder;X=200;Y=300;" From C, an Object on the Desktop may be positioned using WinSetObjectData. A sample C code fragment that moves the Shredder to x=200, y=300 would look like this: /* move the Shredder */ WinSetObjectData(WinQueryObject("<WP_DESKTOP>"),"MOVEICON=Shredder;X=200;Y=300;");
 ftp.pc.ibm.com/pub/pccbbs/os2_ews/exdesk.zip  local copy
Extended Desktop v. 1.4 (23/6/1993) Readme/What's new
(c) Copyright IBM Corporation 1993. All Rights Reserved. Extended Desktop by Dan Campbell REQUIREMENTS ------------ 1) OS/2 2.0 2) Service Pack -- This is the absolute minimum! Make sure that "Always maintain sort order" is not checked on the Sort Page of the Desktop Settings notebook, before you install. INSTALLATION ------------ 1) If you have a previous level of Extended Desktop installed, See "UPGRADE" below or follow REMOVAL instructions below. 2) Copy EXTDESK.DLL to a directory that is listed in your LIBPATH in CONFIG.SYS 3) Run EXTINST.EXE 4) Shutdown and reboot. REMOVAL ------- 1) Run EXTREMOV.EXE 2) Shutdown and reboot. 3) Erase EXTDESK.DLL if you wish. UPGRADE ------- It is possible to update the DLL without going through the full process of REMOVAL followed by another INSTALLATION. A simple addition to CONFIG.SYS will cause EXTDESK.DLL to be updated automatically the next time you boot. To replace EXTDESK.DLL with a new version on the next boot, add the following line anywhere in CONFIG.SYS ( I put it at the top ): CALL=x:\OS2\XCOPY.EXE srcpath\EXTDESK.DLL destpath where "x" is the boot drive on your system, "srcpath" is the full path of the directory where you download new versions of EXTDESK, and "destpath" is the full path where you put the working copy of EXTDESK.DLL. "srcpath" should be a directory that does NOT appear in your LIBPATH. "destpath" must be a directory that DOES appear in your LIBPATH. For example, I put new copies of EXTDESK.DLL in the EXTDESK directory on my E: drive, and put the working copy in the C:\OS2\DLL directory. The line in my CONFIG.SYS is: CALL=C:\OS2\XCOPY.EXE E:\EXTDESK\EXTDESK.DLL C:\OS2\DLL\ WHAT DOES IT DO? ---------------- EXTINST registers the ExtendedDesktop Class, then uses a public API in OS/2 to "replace" the WPDesktop class with the ExtendedDesktop class. Any objects of the WPDesktop class will exhibit the behavior of the ExtendedDesktop class. A reboot is required for it to take effect. I do NOT modify CONFIG.SYS. Everything about your current setup ( settings, icon positions, etc ) remains untouched. The only changes you will see are: 1) Sort and Arrange will be absent from the Desktop context menu, 2) an Align item and a Snap-to-Grid item will be added to the Desktop context menu, 3) 2 Arrange settings pages will be in the Desktop Settings notebook, 4) an Icons settings page will be added to the Desktop Settings notebook, and 5) The Sort settings page will be absent from the Desktop Settings notebook. THE ARRANGE SETTINGS PAGE 1 OF 2 -------------------------------- The Arrange settings page allows you to choose how you wish to be protected from accidental arrange. You have two choices: 1) Arrange and Sort will be removed from the Desktop context menu (and the Sort Page will be removed from the Desktop Settings notebook), or 2) Selecting Arrange or Sort from the Desktop context menu will cause a confirmation dialog to popup. The "Arrange Minimized Windows" check box allows you to choose whether to allow Arrange for Windows that are minimized to the Desktop. The default is No. If this box is checked, an "Arrange Minimized" context menu item will be added to the Desktop context menu. The "Snap to Grid" check box allows you to choose whether the menu item labeled "Snap to Grid" will appear on the Desktop context menu. THE ARRANGE SETTINGS PAGE 2 OF 2 -------------------------------- The "Deselect after Align" checkbox allows you to choose whether the selected items will remain selected after an Align operation. If it is checked, all selected items will be deselected after the Align operation. The default is for them to remain selected. The "Even Spacing on Align" check box allows you to choose whether Icons will be spaced evenly when aligned. If this box is checked, selected icons will be evenly spaced between the two icons on the ends of the selected group. Note that this may move icons such that they no longer conform to the grid. Page 2 of the Arrange Settings also has two spin buttons for setting the Grid Spacing for the "Snap to Grid" function. THE "Snap to Grid" MENU ITEM ON THE DESKTOP CONTEXT MENU -------------------------------------------------------- This menu item only appears if the "Snap to Grid" checkbox is checked on Arrange Settings Page 1. Selecting this menu item causes objects on the Desktop to be moved so that their x- and y-coordinates are multiples of the values set on Arrange Settings Page 2. Objects will not be moved if they already conform to the grid spacing. If moving an object would place it at the same (x,y) location as another object, the second object will be moved one grid spacing to the right. THE "Arrange Minimized" MENU ITEM ON THE DESKTOP CONTEXT MENU ------------------------------------------------------------- This menu item only appears if the "Arrange Minimized Windows" box is checked on Arrange Settings Page 1. Selecting this menu item causes Windows that are minimized to the Desktop to be rearranged just as they would be without ExtendedDesktop installed. THE ALIGN CASCADE MENU ON THE DESKTOP CONTEXT MENU -------------------------------------------------- This item on the Desktop context menu allows you to align a group of objects on the Desktop either vertically or horizontally. To use this, first select a group of objects on the Desktop in one of the following three ways: 1) a. Move the mouse pointer to the first object you want to select. b. Press and hold mouse button 1; then move the pointer over the objects to be selected. c. Release the mouse button. NOTE: Objects will be aligned with object that was selected last. Or: 2) a. Move the mouse pointer to the first object you want to select. b. Press and hold the Ctrl key. c. While holding the Ctrl key, click mouse button 1 on each object to be selected. NOTE: Objects will be aligned with object that was selected last. Or: 3) a. Click mouse button 1 on the object with which you want other objects to be aligned. b. Move the mouse pointer to just outside the objects you want to select. c. Press and hold mouse button 1; then move the pointer to draw a box arround the objects to be selected ( including the object selected in step a). d. Release the mouse button. NOTE: Objects will be aligned with object that was selected in step a. If you wish to align the icons vertically, select "Vertically" from the Align cascade on the Desktop context menu. If you wish to align the icons horizontally, select "Horizontally" from the Align cascade on the Desktop context menu. Aligning vertically changes the x-coordinate of all selected objects to be the same. The y-coordinates will not change. Aligning horizontally changes the y-coordinate of all selected objects to be the same. The x-coordinates will not change. Therefore, it is possible to position objects on top of each other, if you're not careful. THE ICONS SETTINGS PAGE ----------------------- The Icons settings page allows you to precisely position any icon on the Desktop. On this page, the title text of each object on the Desktop appears in a listbox. When you select an item in the listbox, the corresponding object on the Desktop will be hilighted. Also, its x- and y-coordinates will appear in the two spin buttons below the listbox. You can then position the object on the Desktop by changing the values in the spin buttons. Selecting an Icon on the Desktop will cause the corresponding item in the listbox to be selected. POSITIONING AN ICON FROM REXX OR C ---------------------------------- It is possible to position an individual icon from a REXX or C program. This is done using SysSetObjectData from REXX, or WinSetObjectData from C. The data is a character string of the following form: "MOVEICON=title;X=n;Y=m;" where "title" is the Icon's title text, "n" is the desired x-coordinate, and "m" is the desired y-coordinate. The title only needs to be long enough to uniquely identify the object ( e.g., specifying "Shred" would move the Shredder, as long as there wasn't anothere object title beginning with "Shred" ). The title may contain spaces, however, the case must be exact. If the title contains line breaks, place a caret in the title at the point of the line break ( e.g. if the Master Index title text contains line break, the string would be "MOVEICON=Master^Index;X=100;Y=100;" ). From REXX, an Object on the Desktop may be positioned using the SysSetObjectData REXX Utility Function. A sample REXX program that moves the Shredder to x=200, y=300 would look like this: /* move the Shredder */ call RxFuncAdd 'SysLoadFuncs','RexxUtil','SysLoadFuncs' call SysLoadFuncs call SysSetObjectData "<WP_DESKTOP>","MOVEICON=Shredder;X=200;Y=300;" From C, an Object on the Desktop may be positioned using WinSetObjectData. A sample C code fragment that moves the Shredder to x=200, y=300 would look like this: /* move the Shredder */ WinSetObjectData(WinQueryObject("<WP_DESKTOP>"),"MOVEICON=Shredder;X=200;Y=300;");
 hobbes.nmsu.edu/download/pub/os2/util/wps/ExtendedDesktop_1-4.zip
Scheda aggiornata l'ultima volta il: 02/07/2023 - 17:09

Commenti

New Links: https://hobbes.nmsu.edu/download/pub/os2/util/wps/ExtendedDesktop_1-4.zip

Aggiungi un commento